Answer Posted / b.muduli
Anser electrical type-
At lighting time more current passes through the tree to
ground.If u sleep under the tree, u must take hazadeous
shock.So u may die.
| Is This Answer Correct ? | 7 Yes | 9 No |
Post New Answer View All Answers
Explain dc generator with its types?
can we synchronize star system generators with delta system generators?
Why do we pefer VCB over OCB?What are the advantages of VCB over OCB?
2. Modify your design in question 1.a so that the circuit works according to the following function table X Y F 0 0 Clear 0 1 No Change 1 0 Parallel Loading 1 1 Count 3. Design a circuit that detects the pattern 010 in a serial input X considering: 3.a Overlapping 3.b No overlapping
What is the need of earthing transformer for delta side of a transformer. (Think of a line section between a star/delta transformer at a grid substation and delta/star transformer at a village. An earthing transformer is there at the delta side of the star/delta transformer at grid substation). As there are no ground reference there will not be fault current if a one phase is grounded. Further L-L phase will be sensed by the primary side of star/delta transformer as a L-G fault. So why an earthing transformer is required at delta side
What is inrush current?
when the Transmission and Distribution network where is the "feeder" lines are located? and why should be used in T&D network.....
Is there any rule to select the voltage of motor based on KW rating? What is the rating above which lt motor becomes the HT motor?.
What is fault clearing time for Current Limiting Moulded Case Circuit Breaker?.
What are steps to be taken while designing of DYN11 distribution transformer to achieve magnetising balance?
What is the difference between solid grounding and impedance grounding?
Form S and "c" license application both are same? @ tneb portal
what is the electrical?
I'm generating a pulse of 3V with frequency 80Hz (12.5ms time period) and pulse duration 0.125ms and feeding it to a transformer since i want the pulse to get amplified around 60V. At the output amplification s happening but the pulse is changed to a spike, can you tell me what could be the reason? (an ordinary transformer 220V-12V stepdown transformer is reverse connected ie. now it is 12V-220V stepup and voltage amplification happens)
What is the function of Governor in Hydro Power Station? What is the Function of Lightning Arrestor Voltage Transformer (LAVT)?
