i have steam drum height 1000mm. and i want to placed the
transmitter below the tap.how i calculate.
- 1 Answers
- 2225 Views
- OEG, I also Faced
- E-Mail Answers
Answer Posted / Sandhya Yadav
To place a transmitter below a steam drum tap, you would first need to measure the distance from the top of the drum to the desired location for the transmitter. If the height of the drum is 1000mm, and you want to place the transmitter at 500mm from the bottom, then you calculate the total height as 1000mm + 500mm = 1500mm (or 1.5 meters).
For calculating the required cable length between the transmitter and the tap, you would measure the distance horizontally between them.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.
send me model hpcl questions pleas..........my mail id mohideen.dharvesh@gmail.com
hi i am eswar i want to know the instrumentation interview questations for eil(engineers india ltd) i have applied for engineer post in eil please help in this.my mail id eswar310@gmail.com
Sir,I am going to sit for IOCL written test exam. recently.Can anyone tell me the name of 'Objective type Question Book on Instrumentation Engineering ' which will help me. Pl. mail to bidyut_71@rediffmail.com / bidyut.saha2008@indiatimes.com / bidyut.saha09@yahoo.in
give me all the details about the interview and which type of question being asked
any body please send me the old question papers of ongc test.
Questions on flow meters,few questions on HART protocol,
hello friends, can you please send me the model paper or question paper to be prepared for hpcl examinations????????? You can mail me at rahim_here@yahoo.com waiting for your reply........... help me .. plz.....
I am manjunath having exp in maintenance of chemical plants,know i want to do a design course INTOOLS,after doing design course can we get jobs in design field.sinve i dont have design exp..
this site is owned by an nonsense
Punj lloyd is coming in our Jadavpur Universtiy campus for campus placement. Please send me some hints about the writtend exam. My email id is subratafriends@gmail.com
can any send me a forbes marshall dtron 316 manual
please any body have most important data for study for saudi aramco test of instrument QC thanks email shahnaveedullah@gmail.com
where cascade loop use ?
Can any one tell me what type of question asked for instrumentation and control interview panel??? pls mail ramashankar.goel@gmail.com
