Interested to Buy Any Domain ? << Click Here >> for more details...
how to calculate 1:2:4 ratio concrete cement, sand, metal
and water please give me brief calculation
- 34 Answers
- 691614 Views
- Call Centre, CCCL, Oracle, RLM, RPP, Sunanda Infra, Sunrise Enterprises, I also Faced
- E-Mail Answers
Answer Posted / engr, daniel otoyo
For normal concrete which 1:2:4 is in this category, the concrete density is 2400kg/cm
Therefore 1cm of this concrete will weigh 2400x1kg= 2400kg
Sum of mix ratio = 1+2+4 = 7
The ratio (fraction) of cement in the mix is 1/7
And so weight of cement in 1cm of concrete will be 1/7 x 2400 = 342.857kg
Cement in bags of 50kg will translate to 342.857/50 =6.86kg
The above result approximate to 7bags if the required strength of the concrete
is to be achieved.
other constituents of concrete say fine and coarse aggregates can be found
through same procedure.
After finding the weight of the aggregates their densities are used to calculate their volumes.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
what is the max. area can we apply the plate load test ?
what is meaning of inverted beam.is it way to provide double mat in slab one at bottom and another at topif we go for provision of inverted beam. shall we construct structure with out plinth beam for us we have to construct small bus shelter
what does the grad of cement shows (denotes)?
how to take concrete quantity for precast segment for viaduct project?
what pressure the NP2 class RCC pipe can sustain?
What is Curtailing of R/F
where will be the reinforcement of slab placed when there is an inverted beam and the bottom of the beam and slab are at same level ?
for 16mm thick cement plastring 1:6 on 100 Sq.m.New brick work,the quantity of cement required is.
which is the cheapest type of flooring (say for using for 6 months in a factory building & dismantling it)?
What are your future hopes for this job?
What is passive earth pressure ?
WHAT IS YOUR EXPECTED SALARY?
How can you produce desired alloys and discuss their applications in daily life.
if mineral admixture add into concrete then what is the differences between full cement concrete & fly ash added concrete of their SP. Gr.?and for the changes of SP. Gr. what is the changes in concrete
Design a shear wall of length 4.20 m and thickness of 250mm subjected to the following forces.Assume Fck = 25Mpa and Fy = 415Mpa and the wall is a high wall with central part 3440mm x 250mm and two 380mm x 760mm strong bands at each end with following loading. S.No. Loading Axial force Moment Shear 1 DL+LL 1950 600 20 2 Seismic load 250 4800 700
