Answer Posted / ugo
shallow well water is obtained above the first impervious layer while the deep well water is gotten below the first impervious later.
shallow wells yield moderately hard water unlike deep wells.
shallow well gets grossly contaminated unlike deep wells
shallow well is about 2-3m into the aquifier
| Is This Answer Correct ? | 21 Yes | 1 No |
Post New Answer View All Answers
what is w/c ratio in dry lean concrete for m10 mix design
types of survey and levelling instrument ?
where will be the reinforcement of slab placed when there is an inverted beam and the bottom of the beam and slab are at same level ?
can we make bricks using m10 grade cement concrete and what would be the ratio of raw materials used and price per brick ?
how to take concrete quantity for precast segment for viaduct project?
what does the track parameter mean in staad.pro?
how water proof chemicals act in concrete to avoid leek?
Can someone please be curing period of the following according to IS codes Column beam slab brick masonry raft found. and also tell how many hours/day
undistributed samples are obtained by
In foundation design, while we do the base pressure check, we normally check if the attained pressure value is less than the GROSS BEARING CAPACITY of the soil which is the sum of net bearing capacity of soil and the overburden pressure. Actually, the overburden pressure acts against the net bearing capacity of the soil and I feel that we are actually increasing the bearing capacity value and doing the check. I feel that this is NOT right. Please clarify on this.
In case if concrete box girder bridges how is the number of cells determined?
How to estimate the shuttering material requirement for a slab and beam and shear wall..? Please send thumbrule to estimate material required ( Plywood, Ms plates, runners, acrospans, jacks)
What is proportion of PCC Grade G?
how many monpower required for 1 sqm normal RCC structure ( includes finishes & MEP )
cement required for construction of 400mm*200mm*200mm concrete solid blocks for 1sq.mtrs,how?
