Interested to Buy Any Domain ? << Click Here >> for more details...
what are the standard transmision voltages in india?
- 9 Answers
- 12554 Views
- Adani, I also Faced
- E-Mail Answers
Answer Posted / vamsi bellamkonda nellore
132kv 220kv 400kv 765kv
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
1. A 380 / 220 V r.m.s. 3-phase 4-wire circuit carries loads of 8 + j8.1 ohm; 4 + j4.1 ohm; and 2 +j2.1 ohmin the three phases respectively. The length of the circuit is 100 m, and the resistivity of the phase conductors is 0.0005 Ω/m. The neutral conductor is of the same size as the phase conductors. a) Select a reference angle 0for the first phase. Then write down the three phase voltages in both polar format and complex number format. b) Make appropriate assumptions, and take temperature effects on resistance is insignificant. Calculate the currents in the three phases. (Note: Determine conductor resistance, and apply Kirchhoff’s Voltage Law) Based on the result, suggest a main switch rating for the circuit. c) Show your preferred direction of neutral current in a diagram, and then determine its value. (Note: Apply superposition principle, and Kirchhoff’s Current Law) Use its magnitude to show that in this circuit, the unbalanced load may increase the voltage drop in some of the phases. (Note: Also observe the common volt drip in neutral) State your assumptions, if there are any. d) Suddenly the neutral wire of the circuit is broken. Estimate the new currents in the first phase, i.e. Phase L1. State your assumptions, if there are any.
WHAT IS ELECTRICAL MAINTAINTENCE ?
Why do we require transformer with less specific weight if supply frequency is increased?
What is an automatic controller?
which is chemical used as in ro water what is difference betweeen multi grade filter&dual media filter
When semiconductor fuse does save thyristor in each cycle of conduction? Why under voltage setting keep less in SPRS and more in DC drive?
What is accuracy of a measurement?
who many types of fire explane with exmple
DC transmission
Define damping ratio.
HOW WE CHOOSE EARTH'S POTENTIAL AS ZERO V?
What is the high series capacitance winding on high voltage power transformer ?
1.what is the difference between transformer differential and busbar differential.2)why we are using 2 slope for trafo diif and 1 slope for busbar diff.3)what is the purpose of metrosil and stabilizing resistor in high impedance relay circuit.4)how metrosil reduce the peak volage.5)what is the funtion of stabilizing resistor
how to get electrical supervisor competency certificate in gujarat. i did 3 year diploma in electrical
What is the mechanism of WTI
