Interested to Buy Any Domain ? << Click Here >> for more details...
How to replace dia of bar in beam like 25mm 3no.S at bottom
But due to some reason on site 25mm bar is not available
Then is it ok to provide 20mm 4no.S? Give description or
Formula to calculate area of steel and replacement?
- 3 Answers
- 23422 Views
- I also Faced
- E-Mail Answers
Answer Posted / krishna
Dia of bar pi/4*d2* no of bars.
If u replace the bars So pi/4*d2
:dia of bar/ replace of bar gives the total bars of available
| Is This Answer Correct ? | 3 Yes | 0 No |
Post New Answer View All Answers
what is the use of steel rods of 16mm or 20mm used for 4.45mts for closing gutter.one mate consumes how many kgs with a gap of 6inches.
How u can calculate the Octagon ring distance from center of raft in 275 mtr chimney slipform errection? cantact no:0993455097
What in your opinion makes you the most suitably qualified candidate for this post of civil engineering technician?
find the discharge of water through a horizental venturimeter having 400mm dia at the inlet main and 150mm dia at thorat.if the diffrential gauge between inlet and thorat shows a pressure head of 25cm mercury. assume coefficient discharge 0.98 and specfic gravity of mercury as 13.6.
How are freeway bridges built?
How to calculate ventonite bag in pile ( pile depth 25 m dia 1m)
How much area, in square meters, will one liter of paint cover if it is brushed out to uniform thickness of 100 microns?
Explain what is the difference between built area and super built up area?
a concrete mix 1 2 4 by volume with water cement ratio as .6 by weight if moisture content in F.A is 6% with 20% BULKING AND IN C.A 1.5% by volume. find quantities of different materials required for one bag of cement
What is meant by engineering drawing?
Design a shear wall of length 4.20 m and thickness of 250mm subjected to the following forces.Assume Fck = 25Mpa and Fy = 415Mpa and the wall is a high wall with central part 3440mm x 250mm and two 380mm x 760mm strong bands at each end with following loading. S.No. Loading Axial force Moment Shear 1 DL+LL 1950 600 20 2 Seismic load 250 4800 700
what is the max. and mim. height of vertical post in informatry sign board which is used in highway projects.
The properties of concrete HA-30 and how does it differ with M 30 (specify the important characteristics like workability,strength,mix design,slump test value)and what is the standard relating to it
What are the problems one might face while having a Cantilever balcony?
Which type of plywood & sizes using in construction projects ?
