Interested to Buy Any Domain ? << Click Here >> for more details...
While calculating quantity of cement required for 1 qubic meter
If mix is m25 1:1:2 =4
1.52/4=0.38, 0.38x1440=547.20 kgs
I know 1440 is unit weight of cement
And what is 1.52 ?
And some one using 1.54 and 1.53 etc...
Why they are using can u explain me what is 1.52, 1.53, 1.54?
- 4 Answers
- 6121 Views
- I also Faced
- E-Mail Answers
Answer Posted / mahaboobbasha
1.54 is the dry weight of aggregate
| Is This Answer Correct ? | 1 Yes | 2 No |
Post New Answer View All Answers
What is the life of anaerobic Digester if it is used for municipal solid waste digetion.
how can we calculate steel value, depending on load
explain fie benefits of using standard terminology in the measurement process
Providing ,Cutting, bending and positioning of TMT Bar with cost of binding wire
I measured pcc work as 15.34 m cube , the ratio is 1:5:10 ,want to know the cement, sand and metal used for pcc measured as 15.34 m cube at this ratio.
how do you calculate the quantity of steel,cement for plinth beam. (example size 41'*0.58'*1.08')
what is the ingredient value of 40mm and 20mm aggregates?
how to reduce size of column 450 x 750 to 230 x.... if it is cut in area of bathroom? means it appears in bathroon any shifting or any other option....building is g + 10 and the bathroom is at first floor...
What is the Maximum %age of Steel in columns and beams ?
why the openings of sieves are square io size?
why the cracks occurs in NP3 class Hume Pipe ? And what is bearing capacity of it?
rate analysis for cement pointing 1:4 , for 100 sq m
if i used salt as a add mixture in concrete, then what will happen and what are the naturally available add mixtures.
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals
why we are useing plastic under the lean concrete?and whts the advantage?
