Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / annoo kumar prajapati
KW is energy consumed by circuit and KVA is actual suply like (220V, 440V) TO the circuit.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
what kelvin's law ?
oltc of a transformer, how it works? and what are the equipment consist of describe briefly?
Why it is necessary to isolate fire fighting when you are taking shutdown for lv board.
What is Surge Capacitor? Why it is require in Generator Circuit Breaker,inspite of surge arrester?
Please explain me abt PQ diagaram in the power sector.
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
What are the applications of different multistage amplifiers?Plz also write advantages of these amplifiers? Thaaaaaaaaanx
How does a transformer contribute towards the widespread popularity of ac system over dc?
What happen Grid EARTH plat got cut.
explain the function of brush less dc motor?
What is pi controller?
what are all types of cross section in AC cables?
ii) A shunt motor supplied at 230V, runs at 900 rpm when the current is 30A. The resistance of the armature is 0.4 ohms. Calculate the resistance required in series with the armature to reduce the speed to 600 rpm, assuming that the armature current is then 20A. [12]
sourse is 66 KV / 350 MVA, transfarmer is 1000 KVA 6.6 / 0.415 kv, iF fault is 28.75 MVA on 0.415 KV Bus then calculat the Transfarmer Impidance
what are inherent currents?
