Interested to Buy Any Domain ? << Click Here >> for more details...
wt is the difference between clutch and brake?
- 9 Answers
- 49798 Views
- L&T, TVS, I also Faced
- E-Mail Answers
Answer Posted / benjamin ihi
cluth is used to engage or disengage the driving shaft from the driven shaft in other to increase or reduce gear ratio while brake is used to disaccelerate the motion of a moving part.
| Is This Answer Correct ? | 5 Yes | 2 No |
Post New Answer View All Answers
What is diffrence between star & delta connnection in practical situation in submersible pump?
1) Any pipe line working fluid may water / steam on it one manual isolation valve suppose one side of valve 6 kg/ cm^2 pressure (i.e. up stream) and other side is “ 0” kg/ cm^2 pressure(i.e. down stream) . So how much Tourqe required for opening the valve in terms of Newton force wheather normal man can open this valve. (for reference pipe nominal bore is 100 NB )
Greetings This question is about hydraulics and I request an expert to answer it. A simple hydraulic machine is made up of two heads, a larger one with a larger force inside a wider pipe and a smaller one with a smaller force inside a smaller pipe in width as in the second picture on this link: http://science.howstuffworks.com/hydraulic1.htm The question is this: what happens if the smaller head and the smaller force doesn’t exist but the smaller pipe is high enough to take all the liquid? For example the larger head is 1.00 sqr metre and can go down 1.00m under a weight of 100.00kg. The cross sectional area of the smaller pipe is 0.001 sqr metre. Now when the larger head goes down 1.00m, how high the liquid from the wider pipe can go into the smaller pipe of the cross sectional area of 0.001 sqr metre? Regards
How do you check steering gear
A simple problem involing in hoops stress. For sphere: M= [3/2]*p*V*[density of pressure vessel material/Maximum working stress it can tolerate] For Thin walled pressure walls: Hoops stress or stress in the radial direction =p*r/2t ?
sir iam vinod kumar i have done B.TECH. in mechanical engg in 2007 i want to choose career as section engg.please give the information about coaching institute.
What are killed steels and what for these are used ?
What do you do when in your duty, ME alarm oil mist detect high density?
what is run out? how to calulate run out vaue.
How many types of fits are there?
What are bevel gears and what are its types?
What is stellite ?
Explain how are the pneumatic system and the hydraulic system similar?
written test: 1) periodical and monthly maintenance are called preventive or panned maintenance. 2) Mechanical seal parts and their material. 3)Urea plant main parts and their construction material details.4)Name diagram of the given turbine5) Turbine nomenclature like API name.6)All types of corrosion like Galvanic and oxide with example.7)Parts of gate valve and its usage. diaphragm gate valve usage. etc.....
Why supercritical boilers use less amount of steel compared to non-supercritical boilers ?
