URGENT PLEASE//////////A WORK SHOP IS HAVING A 100 KVA
TRANSFORMER 11KV/415 VOLTS,
AND THE CONNECTED LOAD OF THE WORK SHOP IS 80 KW WITH
INDUCTIVE LOADS, LIGHTING LOADS,ETC.,
HOW MANY EARTH ELECTRODES ARE NEEDED AND WHAT IS THE EARTH
RESISTANCE OF EACH EARTH ELECTRODE AND COMBINED EARTH
RESISTANCE in normal soil. AT 11 KV SIDE AND AT LT SIDE. HOW
TO CALCULATE.
Answer Posted / sudhakar g
For any transformer it is better to install two for body
eathing and two for Neutal earthing
Body Earthing: GI pipe 40mm dia using charcoal and salt
like this
Neutral Earthing: Copper plate 600x600x3 mm size for
netural earthing with all neccesary materials
After completion of Earthing you need to check the earth
resistance value for these earthing it should be below 3ohms
I think these are the neccasary requiremnts for your
trasnformer
According to IS standards the distance between pits must be
2.5mtrs and from the building it should be far from 3000mm
I am taking Electrical desining classes in Bangalore...It
will be usefull for designing as well as site engineers
those who are intrested to go for Electrical
Engineers....we give you indepth knowledge of Load calu,
Cable sizing, Lighting cal, panels, breaker
selection,Autocad drawing....if any body intrested means
pls call to +91-7760362623 or sudhakar28485@gmail.com
Is This Answer Correct ? | 2 Yes | 0 No |
Post New Answer View All Answers
what is meant by motor startup supervision & motor load jam protection ?
RATING OF LIGHTENING ARRESTER FOR 11 KV LINE IS 9 KV is ok ,but haw to calculate the KA rating?
A 3-PHASE TRANSFORMER IS USED TO STEP-DOWN THE VOLTAGE OF A 3-PHASE, 11KV FEEDER LINE. PER-PHASE TURNS RATIO IS 12.FOR A PRIMARY LINE CURRENT OF 20A, CALCULATE THE SECOUNDRY LINE VOLTAGE, LINE CURRENT AND OUTPUT KVA FOR FOLLOWING.A)STAR- DELTA.B)DELTA-DELTA.
WHAT R THE SAFETIES IN A HIGH TENSION PANEL N LOW TENSION PANEL. ALSO WAT SAFETIES R THERE IN A 200 KVA TRANSFORMER?
What is the bundle conductor?
What happen if we apply square wave or traiangular waveform voltage to the transformer primary winding instead of sinusoidal wave?
Its possible to use 3core 2R of 240 sq.mm cable for 3phases & separely 50sq.mm 3core cable fully for Neutral for connection of PCC to MCC 3ph..4wire system?
What do you mean by reach and reach the point of the relay?
what is gas turbine intercooling ?
what is reactive power?, why its measured in VA ? is it transient behavior of system?
Approach of a cooling tower is the difference between temperatures of what factors?
How to calculate the no of Ceiling fan (1200mm sweep) per unit area?
wat is the first thing dat is needed, 2 lay a cable in some area??
1)Explain why the cradle guard is used on railway crossing in overhead line construction?
how to calculate slip ring induction motor stator and rotor currents??