Interested to Buy Any Domain ? << Click Here >> for more details...
how do you calculate IKW(consumption per TR) in HVAC?
- 27 Answers
- 151774 Views
- Aircon, CBRE, Cipla, Clivet, Cushman Wakefield, JLL, Sodexo, Voltas, Wipro, I also Faced
- E-Mail Answers
Answer Posted / carol
Be Carefull!!!!
TR and W are POWER UNITS
Btu is an ENERGY UNIT
As everyone knows from Basic Physics:
Energy = Power x time
The actual conversions are:
12.000 Btu/h = 1 TR
1 TR = 3517 W
Therefore,
12.000 Btu = 1 TR-h
12.000 Btu = 3517 kWh
Watchout!!!!!.....
| Is This Answer Correct ? | 8 Yes | 2 No |
Post New Answer View All Answers
Give some example of fault limiting devices?
What is 100% protection of generator? Why 100% is not used but 95% is generally used?
Can we use a absolute encoder to show rpm of a motor ? what about the condition when power is off ? what is difference if a incremental one is used ?abanirout@gmail.com
excitation limit of an excitor
what is the purpose of bypass mode in energy lighting transformer?
11kv/433v delta/star distribution transformer primary side full load Ht current is 83.33A in , but input side VCB rating 800A.why?
what is the pulse and audio frequency transformer? what is different between induction regulators and tap changing transformer?
234 MVA Generator 3 phase Short circuit current Values required? Gen set Rating-234 MVA, Gen Voltage-18kv, PF;0.8, Xdv:23.5 %, Transformer Rating-18/380KV, 680MVA,Yndd1 two winding, Step up TR, ZT:35.50 %,X/R 4.33 Gen CB Position, CB open ,Disconnected open, Generator Running Voltage 18 Kv, Bi mistakes generator side earth switch Closed during that time short circuit current level in 3 Phase required, and how to test on site 234MVA Generator Short circuit current,
A double circuit with dog conductor 66KV Transmission line from wind farm evacuation to feeding substation having capacity of 25MW for transmission. Can same transmission network be considered for further expansion of Power & how much in MW. If we need to expand next 10-15 MW more will there any augmentation is required in transmission network? Kindly reply asap.
When can we take Neutral as common neutral link?
The Q-facr o of a coil given as wL/R. what will be shape of Q versus frequency graph.
What do you mean by reach and reach the point of the relay?
how could we calculate the no of outgoings from a 800 watt distribution board
Hi everyone, I'm Lachuu, recently joined automation company as PLC Engineer. I have certain basic question, I request all big gurus and seniors to answer these question. Because this will be very helpful to me as well starters like me. How to design a control circuit (ex: pick & place - my current project) Yamaha robot PxYx series controller RCX222, using 6 cylinder double acting, plc keyence kv p16r 2 expansion unit for input and output each. How to select panel terminal mcb elcb powersupply. My main concern in some projects how to select dc power supply, mcb rcb(I came across dif bt b c d curves, but stil confusing, pls help me :-(. I would really appreciate all who are going respond to this question.
What will happened if the neutral of secondary of Xformer ( Star point) Note it's above KVA rated Xformer
