in BUILT UP AREA BASIS WHAT IS RATIO OF CONCRTE & STEEL
RATIO MAY BE CONCIDER IN PER SQFT QTY
Answer Posted / abhijeet gavkar
For Conc. : .025 Cmt. / Sqft.
For Steel
G+8 stored : 3.75 Kg./Sqft.
G+14 stored : 5.00 Kg./Sqft.
G+20 and above : 7.00 to 8.00 Kg./Sqft.
| Is This Answer Correct ? | 1 Yes | 1 No |
Post New Answer View All Answers
What are the uses of alloys in daily life and how are alloys made?
what is differences between ferrock and concrete ?
how to diffenentiate the fixed beam and simply supported beam in the execution while reading the drawing and how the reinforcement detail will be differ for the above.
225 mm thick RCC slab, how many ton load slab can carry? for example if 33 ton truck loaded with soil, truck having 6 wheels. slab can take load or not? grade of concrete is M35 and slab design Fe500, slab desing one way slab.
why is M25 and Fe 500 assumed to be most economical? i feel it is not.This is because higher grade of concrete and steel has higher lapping length and anchorage length compared to lower grades..
How to do base isolation using ETABS software?
With reference to construction of state highways, please let me know the total Bill Of Quantities as per the following details:- 1) Subgrade - 500 mm 2) Granular Sub-Base (GSB) - 200 mm 3) Wet Mix Macadam I (WMM I) - 150 mm 4) Wet Mix Macadam II (WMM II) - 100 mm 5) Dense Bituminous Macadam (DBM) - 60 mm 6) Bituminous Crust (BC) - 40 mm Road Length is 44 Kms. Road Width is 7 mtrs. Please provide the BOQ of each layer as per Compacted Factor & Loose Factor both. Also, if possible please provide me the approximate details of total material required (all categories viz. soil, gravel, stone aggregrate, sand, bitumen etc.) as per general mix design prevailing in India. Thanks & Regards -- Rokr
Can anybody help by describing each and every step in short, used while giving a building layout by total station? Regards
what is the specific gravity of rubble in plum concert
B.M DIAGRAMS & S.F DIAGRAMS OF CONTINOUS BEAMS
The internal dimensions of a wire house 15m*5.6m and the maximum height of piles is 2.70m. What is the maximum number of bags to be stored in two piles ?
How much cement,sand,bricks and water needed for 1square metre brick work?
Can we use Polystyrene as a Bitumen modifier !! if so is it a good MS research topic ? and what type of laboratory tests will be conducted during Research work ??
What is costing in 100squre feet bricks
what are the duties of Site Engineer in work site?