Q- voltage source of 12v is driving the circuit.if circut
draw the current of 0.5A them source voltage will became
11.8v.what is the power dilevered by source when circuit
draw 5A current ?
Answer Posted / badshah hussain rizvi
internal resistance is .4ohm.hence poewer loss is 10watt.so
net power delivered is 50 watts.
Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
What is the use of control cable?
What are the key features of a Distributed Control System? describing the various layers (sensor through to business system interfaces) as well as the hardware, software and security aspects of the DCS.
What is the basic difference between Modbus and CAN Open Protocols
Name different parts of a pressure gauge.
why orfice is not used for main steam flow calculation
Can anyone send most commonley asked Instrumentation questions and answers in cement industry please?
In apron feeder how TPH is calculated?
what is actual drum level and compensated drum level?
What is the cascade control
HOW TO CHOOSE FREAQUENCY IN FMCW TYPE RADAR INSTRUMENTS. DESIGN BASIS OR DESIGN CALCULATONS ?
Calculate the maximum pressure drop that can be allowed to occur across a control valve, so that we can prevent cavitation / flashing from occurring. Use the following formula: Δ P allow = Km (P1 – PvapourA) where, Δ P allow - the maximum allowable differential pressure for sizing purposes, or terminal pressure drop; Km- the valve recovery coefficient from the manufacturer’s catalogue; P1 - absolute inlet fluid pressure; PvapourA - absolute fluid vapour pressure at the inlet temperature; Use Atmospheric pressure = 101.3 kPa, P1 = 1200 kPa(g), PvapourA = 4 kPa, KM = 0.72
How to Calibrate Flow Switch in field
Pressure tx shows 1 mbar but we need 1000 mbar at this process condition .. how can we sort it out .
Difference between 2-Valve Manifolds, 3-Valve Manifolds and 5-Valve Manifolds 3 with diagram
I have energy meter for educational project having 0.5s class but my friend need 0.2s class meter , which one is good for that purpose and what is the actual difference of that two classes , need very easy example also.??