1 Cum Brick Work CM 1: 6 - How Many Bricks ,sand,Cement
Required? Brick Size 9" 4.5" 3"
Answer Posted / md gyasuddin ahsan
Sorry For above Answer
By Analysis of Rate-2007
#Bricks of class designation 7.5 in foundation and plinth
in :-
Brick with wastage = 494
Mortar = .25
Cement Ratio is 1:6, then
Cement=(.25/(1+6))*1 = .0357 cum
Cement in Bags = .0357/.034722 = 1.0286 bags
Sand = (.25/(1+6))*6 = 0.2143 cum
= 0.2143 * 35.29 = 7.56 Cft
# Bricks of class designation 7.5 in superstructure above
plinth level up to floor V level in all shapes and sizes
in:-
Brick with wastage = 494
Mortar = .22
Cement Ratio is 1:6, then
Cement=(.22/(1+6))*1 = .03143 cum
Cement in Bags = .03143/.034722 = 0.905 bags
Sand = (.22/(1+6))*6 = 0.189cum
= 0.189* 35.29 = 6.655 Cft
Is This Answer Correct ? | 20 Yes | 19 No |
Post New Answer View All Answers
what is concrete canvas?
Did any of the egyptian pyramids ever fall down?
The foundations are placed below ground level, to increase?
What is the software used in civil engineering?
Exterior Joints,define
What is kn measurement?
Basic civil interview questions
Why reinforcement done in shorter span in two way slabs
What do you understand by “preset” during the installation process of bridge bearings?
a solid steel rod length 2m dia and 20mm vertically hangs from celling and has a collar firmly atteched to it. above the collar an annular rubber washer of 40mm th. having stifness k = 5n/mm is placed. determine maximum stress in the rod caused by mass of 5 kg falling through a height of 1.2m.
how many cement used in single story residential building per sqft
Explain moment of inertia?
The largest size of paper used in plotter to print the drawing made by Autocad .
What is horizon or horizontal mining?
A 16 pile group, consisting of diameter concrete piles, were cast in situ in a clayey soil whose unconfined compressive strength is 1100 psf. Each pile is 60 ft long and the pile spacing is 2.5 times the pile diameter.The water table is at the ground surface and saturated unit weight of the clay is 118 lb/cu.ft. using a factor of safety 3 and a reduction factor =0.45, compute the allowable capacity of the piles acting as individuals