Interested to Buy Any Domain ? << Click Here >> for more details...
wat is the optimum mix design for M25 grade of concrete ?
is the ratio 1:1.5:3.65 correct?
- 7 Answers
- 34617 Views
- ACC, I also Faced
- E-Mail Answers
Answer Posted / lalit lokhande
When you go through the mix design ..it almost comes like
1:2.06:3.53,
1:1.5:3.65 is almost correct except the quantity of sand.
| Is This Answer Correct ? | 1 Yes | 9 No |
Post New Answer View All Answers
Please tell me the quantity of cement, sand, flyash, foaming agent required for 1 cubic meter of cellular lightweight concrete blocks. also , is there any admixtures required for the CLC blocks production.
1.How much batten required for 1 sqm Shuttering. 2.how much pipe & clamps required for staging of 100 sqm shuttering at 5.0 m height.
What is the diff between cad & cadd?
how gradation of aggregates effect on slump of fresh concrete?
What is the wall thickness of NP-3&NP-4 hume pipe as per I.S code
how we calculate the grade of the Bituminous materials.?????
sir I got selected in rail vikas nigam limited and they call for interview but i don't what they will ask in interview please guide me if you have any experience
What is the purpose of Chipping in the heavy foundation?
if the nitrates more than 45mg/l in water lead to disease then what is it called
With reference to construction of state highways, please let me know the total Bill Of Quantities as per the following details:- 1) Subgrade - 500 mm 2) Granular Sub-Base (GSB) - 200 mm 3) Wet Mix Macadam I (WMM I) - 150 mm 4) Wet Mix Macadam II (WMM II) - 100 mm 5) Dense Bituminous Macadam (DBM) - 60 mm 6) Bituminous Crust (BC) - 40 mm Road Length is 44 Kms. Road Width is 7 mtrs. Please provide the BOQ of each layer as per Compacted Factor & Loose Factor both. Also, if possible please provide me the approximate details of total material required (all categories viz. soil, gravel, stone aggregrate, sand, bitumen etc.) as per general mix design prevailing in India. Thanks & Regards -- Rokr
Why steel rods are produced only in even dimensions?
in block masonry l=10',b=0.5',H=10',Calculate cement ,sand and no.Of blocks?
Hi.. Can i get hel in finding HPCL previous year question paper? plz help me in finding thiss..
Design a reinforced concrete combined footing (rectangular) for two columns located 3.60 metres apart. The overall sizes of the columns are 40cm x 40cm and 69cm x 60cm and the loads on them are 1000 kn and 1500 kn respectively. The space available for the width of the footing is restricted to 180cm. The S.B.C. of the soil is 280 kn/mm2 use M15 concrete.
How to calculate ventonite bag in pile ( pile depth 25 m dia 1m)
