Interested to Buy Any Domain ? << Click Here >> for more details...
What will be the minimum megger value of 1700 KVA Transformer?
a) Do megger value varies according to climate conditions
and area .
b) If megger value is 100 mega ohm is it good for new
transfomer.
Explain?
- 4 Answers
- 7800 Views
- I also Faced
- E-Mail Answers
Answer Posted / shariff
There is no minimum or max. value for any transformer
Insulation resistance values( not megger value),the main
factor here is the polarization index value .ie, the IR
value should decay with the time of the time of applied VG.
and the ratio of PI should be morethan 1,and the climatic
conditions will decay the IR values.
| Is This Answer Correct ? | 0 Yes | 1 No |
Post New Answer View All Answers
Define availability (operational)?
What is dielectric loss?
sir please tel me how calucalte kwh if home taken load 30ams how maney kwh taken per day.and 3phase motor 5hp per hars how maney load teken and how mach kwh and forward me to electrical table for calicalte kwh and kvr and kvah
Application Comparison between 22KV (UE)and 33KV (E) system. Are we allowed to use 33KV (E) cable in lieu of 22KV (UE) cable. What are the technical disadvantages.
What are the symptoms of a bad PG card of a drive (inverter) esp. of Yaskawa Ac Drives (inverters) G7 ?
Why use in ht motore
Why we are using only Dyn11 tranformer in distribution system but not using a Dyn1 in distributing system?why not and advantage and disadvantage in both
What are the classifications of heating element?
Explain Random and Deterministic signals?
stand by earth fault protection (51G) for transformer rating 2000 kVA,Dyn11,33/0.400 V. LV NCT ratio and necessary resistor and metrosil values how to calculate
What will be the impact on motor performance if a LT motor is rewound with changed motor winding data as given below:- Original winding data: total 04 wires = 02 wires of 17 SWG + 02 wires of 16.5 SWG. Changed Winding data: total 03 wires of 15.5 SWG wire size Motor rating: 160KW, 740RPM, 415V, ID FAN application. Normal Running Current = 95% of FL Current.
is all the servo motors having brake?please specify which servo motors having brake for stop on position and which are not.
What is voltage divider rule?
Which Class insulation is prefered for the sandwich Busducts ? Why?
what happen if the parallel generator phase angle shift by 1 degree in manual mode
