Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / dwi tjahjono
Open delta connection (for PT as protection) usefull to detect the shifting voltage during normal and faulty condition.
We can use this to set the directional relay
| Is This Answer Correct ? | 2 Yes | 0 No |
Post New Answer View All Answers
if we apply 1000ADC instead of 100ADC or We apply 50ADC instead of 100ADC,What will be happened in the test result value.Pl explain
What is the difference between circuit breaker and isolator
How to calculate KVA/VA rating of PT or CT from primary & secondary voltage or primary & secondary current?
How to know th details about an electrical Drawing ? Please mention the easy method.
defination of transistor controlled series capacitor
Transformer diagram mention each parts ?
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
draw 3 phase rectifier diagram
What is the basic rule for block diagram reduction technique?
BSNL TTA EXAM QUESTION
how can you size an automatic voltage regulator?
what is metering cum synchronizing panel and how it is used?
ASTM D 3455 - Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin has been used for Testing Transformer Oils with a product placed in it. Aged Control Oil has a Power Factor of 0.032% at 100°C. Aged Oil with a Test component has a Power Factor of 0.093% at 100°. Is this increase acceptable? If not why? How much increase is acceptable?
if the number of poles generated in stator and rotor side of an induction motor are different then what will happen and why?
What is the simplest formula to calculate the rotor diameter of a synchronous generator?
