Interested to Buy Any Domain ? << Click Here >> for more details...
As a site engineer what do you check in foundation before
concreting
- 3 Answers
- 11117 Views
- I also Faced
- E-Mail Answers
Answer Posted / kdg
as a site engineer, you need not check soil bearing capacity
and etc. because the designer has already considered the
bearing capacity during designing. you have to check the
following-
1. the drawings used for survey, shuttering, reinforcement
are of latest revision or not.
2. check the survey report
3. check alignment (co-ordinates) of foundation as per drawing
4. check reinforcement details as per drawing/approved BBS
5. check the dimension of foundation
6. check for PCC top level and RCC top level (as marked in
inner face of shuttering)
7. check for concrete cover at bottom and sides
8. check for alignment of pedestal reinforcement dowels
9. check for tying of rabars specially at every crossings
10. check for de watering, if necessary
11. check for arrangement of manpower, vibrators, access for
pouring etc.
12. if everything is ok, sign the concrete pour card and
proceed for pouring.
11.
| Is This Answer Correct ? | 34 Yes | 1 No |
Post New Answer View All Answers
what is grade intersection?
how to find hardness of water?why it should be determined?
Can inverted beams used in pipes during construction?
Could you please give me an answer to the mixing proportion of concrete M1 grade (sterngth of 1 MPa)?
How to calculate cement, water, fly ash amount for 1 cum if the w/c ratio is 0.4 and fly ash to cement ratio is 1:9
what is meant by residual strain?
How much river sand contain the 6 & 10 wheeler truck? Or Maximum sand that any type of truck carry?
how to calculate the strength of rebound hammer test reading in building construction ?
Can we apply curing compound on ceiling (slab Bottom)
What is OSHA compliance?
Calculate the maximum allowable speed on a horizontal curve of radius 350m if the maximum allowable values of the lateral coefficient of friction are 0.14 and the rate of superelevation is 0.08.
What is the l/d ratio of cantilever beam?
What is capicity of cap lock scffolding stander(vertical member) and ledger of different size?
what is the mix design for M:60 with micro silica andmetakaoline?
In the different classes or grades of concrete, what is the difference between C20, M20 B20. what are the letters C, M, and B stands for.
