Explain how you can give the overload setting to any Motor
Protection
Relay for a HT motors with formula and example?
- 2 Answers
- 6219 Views
- I also Faced
- E-Mail Answers
Answer Posted / manish
=32*0.9
=28
| Is This Answer Correct ? | 3 Yes | 1 No |
Post New Answer View All Answers
Why Neutral Isolation is required?
why we use Test Terminal Block in 11 KV and 33 KV electrical panels.
how we find transformer capacity by ohm
How to decide whether A / B / C / D curve type MCB should be used?
What are the application of filter?
Calculate torque developed by the 3-phase, 5 H.P., 4 pole induction motor runs at 1500 rpm A 23 N-m B 21 N-m C 10 N-m D 0 N-m
can we use trip light with bus coupler?
what is meaning of bus riser
What is industrial plc
How phase displacement change in the over current relay coils.
what is two point starter?
Please clarify, 1. Is it required to lay two runs of GI wire along with Armoured LT cable if it is laid between one big mains (63Amps TPN SDF) to small main (32A TPN SDF) with proper glanding termination? 2. If the armoured cable with proper glanding is laid from DB to CNC machine, is it required to run two runs of body earthing to the Machine from DB? 3.If the armoured cable with proper glanding is laid from Substation to Hangar, distance is approx. 100 mtrs, is it required to do earthing at shop area though the primary termination at substation is earthed through gland.
please tell me, how i clear the objective test? when i studied form the one book after i solved the objective ,that time i solved that qes. but if i tried solve objective form the other book then i could not solved these que.
when 20hp 3 phase motor start no load condition in star or delta connection.find current and write formula.(tariq)
what is smart grid? why we use it? explain in detals bcoz i want give presentatin from it....
