shall we use a machine having 60Hz frequency in india ? why?
- 4 Answers
- 5048 Views
- I also Faced
- E-Mail Answers
Answer Posted / gaurav tripathi
we can use machine on 60 hz by using cycloconverter and
filters
| Is This Answer Correct ? | 3 Yes | 0 No |
Post New Answer View All Answers
how we start 40w tube light with 4 diodes,2capacitors,1 choke and without starter.(a product avilable in market which lights burnt tube lights also)
what is the difference between ac motor and dc generator
Practical condition in 400KV Sub station:- Breaker(open) , isolator(open), Earthing (close) at both end e.g A & B. Now Open A Stn Earthing than Open B stn Earthing (Which have a 50MVA reactor) , AND suddenly show R,Y,B phase 704KV,573KV,118KV respectively. Que is without closing of breaker how it is possible.???? My Whats app No:07621840498 for Further Discussion. Pls experts suggest.
what is draiv work
Please help me regarding my one concern. - During earth pit testing we noticed that the Clean earth pit and dirty earth pit showing continuity (Resistance value - 5ohm) . I want to know that if both earth pit have separate location and there is not internal looping between PIT then why such continuity is showing on it . Because of this issue the field side all earthing point showing short. In PLC panel we are providing two types of earthing cable which is coming from separate earth pit (Clean and Dirty earth pit) because of earth PIT showing short our PLC is not complying spec . please help regarding this issues.
by what factor the starting current is used when comparing star and delta connection for motor starting?
I have been using an 600VA with 0.6 p.f UPS with my desktop which has 450W power supply unit. Can anyone explain how can this happen . Because the output of the UPS is 360W (600*0.6) (<450W)
Define peak overshoot.
I am EEE student i want to improve my core side skills.how cn i approach it?
how to interlock 3 nos MCCBs using under voltage coil. please provide me circuit diagram?
What is the working mechanism of OLTC in Power Transformers????
Diagram on interconnectivity of 11kv transformer with RMU (i.e, one incoming and two outgoing or two incoming and one outgoing)
Saving in copper achieved by converting a 2 winding transformer in to an auto transformer is determined by A voltage transformation ratio B load on secondary C quality of core material D size of transformer core
what is Anti-pumping?
can you any one give exact mathematical relation between AC current and DC current?
