Interested to Buy Any Domain ? << Click Here >> for more details...
why all selected supply voltages are multiple of
11.i.e440,11 kv,33 kv,66 kv,110 kv etc
- 6 Answers
- 13788 Views
- Suzlon, TCS, I also Faced
- E-Mail Answers
Answer Posted / virendra
Kuldeep is exactly right , its just because of form factor
which is 1.1 so 22,33 are the multiple of 1.1
| Is This Answer Correct ? | 5 Yes | 1 No |
Post New Answer View All Answers
What is milivolt dop test in Busducts? What is its significance & procedure to do the test?
When lag/lead/lag-lead compensation is employed?
Draw a 230kv two-bus bar system showing the following. 1.Two generators (150MW) each connected through one 15.75/230KV transformers 2. 1 outgoing lines 3. Two 230/130 KV transformers 4. BUS PT's 5. CT
how to calculate kvar in Akiva
How many types of oil using in H/T & L/T Oil Circuit Breakers. need Explenation ?
A commercial Building is designed with 14th floor levels with indoor substation of three phase transformer with rated capacity of 1000 Kva.The transformer delivered 65% of its rated capacity at 0.67 power factor lagging.Because of low power factor, the power customer was penalized and certain cost was charged accordingly based on every point percentage lower than 85%.This situation may repeatedly happen on the succeding energy bills of power customer.The power customer is desired to improve its historical power factor of 0.67 lagging and no further penalty be impose by the local power company on the next bill. Q: Identify the appropriate solution you want to offer to Client?.Justify SCIENTIFICALLY and MATHEMATICALLY the principles behind the solution.
what is the power factor used by the PHCN in nigeria? 2. what is the difference between an alternator and generator. 3. Generation of poweris in KV but how is transmission is in MW. 4.If the transmission of power is 20,000MW how can it be increaesed to 80,000MW
wHAT IS CAPACITANCE LATCHING? hOW TO CALCULATE CAPACITANCE LATCHING? hOW TO SOLVE THE PROBLEM IF CAPACITANCE LATCHING APPLIED?
what kn of disc is used in 33kv,132kv,220kv,400kv,800kv transmission line
What is the difference between voltages or potential difference? And what are they?
Differentiate between ideal and non-ideal voltage sources?
What is the working principle of MIG welding? and its out put Voltage?
What are high pass filter and low pass filter? and What are the flowmeter ?
Phase control and integral control are used for?
Difference between Earthing Truck & Earthing trolly for HT panel
