Interested to Buy Any Domain ? << Click Here >> for more details...
1. which type of transformer connection is preferred in
case of power supply transformers?
(A) Star/Star
(B) Delta/Delta
(C) Star/Delta
(D) Zig Zag/Star
2. In a power transformer usuall which winding is closer to
the core?
(A) Primary winding
(B) Secondary winding
(C) Low Voltage winding
(D) High Voltage winding
3. The power factor of a purely inductive load is
(A) Zero
(B) Lagging
(C) Leading
(D) Unity.
- 9 Answers
- 12691 Views
- CECRI_Central_Electrical_Research_Institute, I also Faced
- E-Mail Answers
Answer Posted / moloy dey
1. In case of supply transformer DELTA/STAR is used to
ensure 440[Ph to Ph] and 220 [Ph to N] both type of consumers.
2. (A) Primary winding stays close to the core.
3. The power factor of a purely inductive / capacitive load
is always (A) Zero, Hence, the power drawn by a
pure/loss-less inductor/capacitor is VxIx'0' = '0' [Zero]
| Is This Answer Correct ? | 1 Yes | 5 No |
Post New Answer View All Answers
What are factors to be considered while we selecting the Core Balance Current Transformer for Earth fault protection
use of choke in APFC panels
what are the main applications of transistor in non-linear region?
WHAT IS THE CURRENT CARRYING CAPACITY OF 2.5/3 CORE HI TUFF CABLE,WILL IT SAFLEY CARRY 8.6 AMPS OVER 120 METRES,CAN YOU ALSO ANSWER WITH FORMULA FOR WORKINGS OUT ,THANK YOU 3RDYR APPRENTICE.
how are reversing the direction of rotation of dc motor
Why using synchronising methed in DG's sets?
how can we change the phase angle b/w two phase?
How we can determine short circuiting current any plant and for example a plant which power generation is 415 volts and plant load is 500 kw.
What does quality factor depend on in resonance?
If the feeder rating is 7.5 kw or 10 HP star-delta feeder, MCCB is taken as 63 a, contactors-32 a, how much will be the OLR rating or which range OLR should be considered when we concern about type-2 coordination?
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
what is the differebt between ac and dc fuse?
Where burned of electricity,when,who, & why.
How does cost of generation from hydropower plant compare with other sources of electricity?
In Generator How suction compression power and exhaust works ?
