Interested to Buy Any Domain ? << Click Here >> for more details...
What do you mean by Transformer?
- 9 Answers
- 15675 Views
- Hyundai, NTPC, wbsedcl, I also Faced
- E-Mail Answers
Answer Posted / shyamkr
transformer is a piece of electromagnetic device which
transfers electrical energy from one circuit to another
circuit by the help of coupling magnetic field without
change in frequency.
the side which receives energy from source is called primary
while the side to which load is connected is called secondary.
| Is This Answer Correct ? | 10 Yes | 0 No |
Post New Answer View All Answers
with 3 phase board on a 63 amp rcd is it ok to have 6 electrical showers 2 on each phase and what problems could happen
What is the name of transformers oil filteration equipment?
How much voltage we need to apply in 33kv cable during hipot test of cable
Explain how you decide what size of electrical wire do you need?
placing earthing pit in pathway is correct or wrong??. placing earthing wireGI1/18 inside walls is correct or wrong?. explain!!!
What is the difference between electronic regulator and ordinary rheostat regulator for fans?
Give some differences between open loop and closed loop?
What will happen if i used 11KV earth ht kit to 11 KV / 11 KV cable termination?
What is the effect on Power factor and capacitor when your company load is more than 70 % of welding transformer
what material is used in capaciter
if 3400kw slipring motor rotor shorting done and motor started on mv drive ,what will be the rotor shoring current
What determines the thickness of the lamination or stamping?
What current position are you holding in your current company?
What is the RMS and DFT principle of analogue maesurments. Which way they are advangages. where which princples give optimum results.
We have studied about many techniques for finding the stability of system, ROOT LOCUS, ROUTH, BODE PLOT, POLER PLOT etc. In these which is used where. what are the difference among them... PLZ tell me.......
