Interested to Buy Any Domain ? << Click Here >> for more details...
what is Real power and Reactive power ? what is difference
between them ?
- 5 Answers
- 8526 Views
- I also Faced
- E-Mail Answers
Answer Posted / vnod
Ans 1 is very correct.
reactive power is using to produce the working flux for
energy conversion (not losses).every generating station
supplying sufficient reactive power as per load centre
demand.
| Is This Answer Correct ? | 1 Yes | 1 No |
Post New Answer View All Answers
What is the disadventage of gland earthing(power cable) if any. ?
How we select the vector group of 3phase power transformer?
explain remenance . differentiate high remenance type ct & low remenance type ct
what happens to the supply voltage if there is any change in frequency?
what is the maximum temperature rating of a thhn insulated conductor?
What is the basic principal, by which DC voltage level is increased more than the supplied AC voltage during conversion. As upto AC level it is contorrled by firing anlge but after maximum level how is it possible.Please clear picture. OR we have to supply the higher level AC?
Who are the manufacturer for Nitrogen based Fire Protectio/explosion prevention for Oil Filled Transformers? India and international both?
What are the causes of unbalanced current on 34.5kv feeder Ia=0.05,Ib= 0.25, Ic=0.15 and In=0.27 prior to tripping current are balance?
What is transister define the transister ammiter ,base, colector.
I have made a 3 phase thyristor full bridge rectifier. But at the moment it is working only for the half bridge operation. Both the half bridges are on operation separately but when i put it into full bridge operation the oscilloscope output is zero. I rechecked that the pulses are correct for each thyristor. what could be the possible reason for this?
What happens to voltage when current through the inductor is constant?
i need project topics along with circuit diagram in the electrical and electronics engg and also some websites regarding projets.
How many types of colling system it trformers?
How many double suspension hardware fittings are required on a double circuit transmission tower?
how to find number of run cable laying[LT side] for transformer & alternator secondary side? [above condition for getting output power transformer to main panel side] give the example.
