Interested to Buy Any Domain ? << Click Here >> for more details...
Why the transmision line are
11,33,63,132kv?
- 10 Answers
- 14723 Views
- Power Grid, I also Faced
- E-Mail Answers
Answer Posted / deben.
Answer this your self !
| Is This Answer Correct ? | 6 Yes | 21 No |
Post New Answer View All Answers
Application Comparison between 22KV (UE)and 33KV (E) system. Are we allowed to use 33KV (E) cable in lieu of 22KV (UE) cable. What are the technical disadvantages.
HOE WE CAN IMPROOVE BY USE OF CAPACITOR
I have a drawing of a wound rotor induction motor for a crane. This crane motor has 5 forward speeds & 5 reverse speed implemented of course with different amount of resistance for each speed setting selected. What has got me scratching around is the fact that 8 of the 10 speed selections switch in uneven (unbalanced) amounts of resistances on each of the 3 connections to the motor's rotor.Can this be possible? I would have assumed this would produce unbalanced rotor currents and therefore vibration in the motor. I would greatly appreciate anyone's comments on this. Many thanks, Confused.
Refernce currents are to be generated using refernce cueernts how can this be done??
What should be the length of transmission line so that we can see/obtain the full sine wave of voltage??
how can we understand that where we have to use ac or dc coil for solenoid valve and why?what is the different between coil of ac and dc explain please.
When we use 3 terminal resistor?
How to use earthing on shipments.
what do you mean by class PS CT and what are technical details needed for calculating it?
My load is 1635 KW. & current pf is 0.884, I have to improve it for 0.99.Please suggest what KVAR value is needed?
What is use of starter and choke in tube light
what is spadar bar .why I use in DC generator.
What should be the values of settling time, peak time, steady state error, overshoot, rise time, MPOS (Maximum percent over shoot) to keep the system in transient state, to keep the system in steady state ?
Power factor =1.000 at factory in supply. However, PF = 0.8 at motor end. Current = 100 Amp, Voltage = 400 V. What is the power distribution loss? Can I reduce it by adding capacitor at the load feeder?
Control cables in S's will carry 1000v which is AC R DC? Pls answer me
