routing
1. Difference between RIPv1 and RIPv2?
2. How many number of routes carried by RIP packet?
3. Is OSPF link state or distance vector or path vector
protocol?
4. What is the difference between OSPF and IS-IS and which
one is preferred?
5. Can we use BGP instead of any IGP?
6. How many network types available in OSPF?
7. Different type of Link State Advertisements aka LSA?
8. LSA 3 and LSA 4 are generated by which router?
9. When to use Stub and Not So Stubby Area?
10. How to get the external routes without making area Not
So Stubby?
11. What is the different type of route summarization
available in OSPF?
12. What is the requirement of doing summarization?
13. A major network is advertised as summary in one area
and few of the routes from that network is configured in
another area. What will happen in that case?
14. If any of the OSPF area is not stabilized, does it
impact another area?
15. What is the use of forwarding address in LSA 5 and LSA
7?
16. External routes are available in OSPF database but not
installing in routing table?
17. If loopback is not configured, what will be the router-
id selected by OSPF process?
18. Can we run multiple OSPF process in single router and
what is the advantage of using it?
19. What are timers of OSPF?
20. Multicast address of used by OSPF.
21. OSPF works on which layer?
22. What is backbone area in OSPF?
23. Can we use OSPF without backbone area?
24. Is it required that OSPF router-id must reachable in
IGP cloud?
25. After configuring new router-id, automatically it will
be used or do we need to use some type of command to get it
operational.
26. Why the secondary ip address of interface is not
advertising in IGP cloud?
27. OSPF neighbourship is not coming up. Please tell the
various steps to troubleshoot it.
28. One side MTU is 1500 and another side MTU is 1600. Does
it affect neighbourship?
29. Provide process of DR and BDR election.
30. If DR is down and no BDR is configured what will happen?
31. What is the difference between a neighbor and adjacent
neighbor?
32. My OSPF neighbourship is showing 2-way, what does it
mean?
33. Define different type of OSPF neighbor states?
34. OSPF external routes are not redistributing?



switching

1. Difference between hub, bridge and switch?
2. What is mac address and why it is required?
3. In layer 2 domain do we need ip address for
communication?
4. What is arp and why it is required?
5. What is Spanning Tree Protocol aka STP?
6. What is the difference between STP, MSTP, PVST and RSTP?
7. Can we use the two same paths for same vlan?
8. What is the difference between broadcast and collision
domain?
9. Define type of lan traffic.
10. What is destination address of broadcast frame?
11. Can we connect a switch to switch with straight cable?
12. Define functions of switch.
13. What is arp timeout?
14. What is aging process?
15. What is BPDU?
16. What is path cost?
17. Define selection criteria of STP root bridge.
18. How to non bridge decide which port will elect as root
port?
19. If a nonroot bridge has two redundant ports with the
same root path cost, how does the bridge choose which port
will be the root port?
20. Port states of spanning tree protocol.
21. If the users face delay during initial login, what you
will suggest to implement?
22. Why spanning tree BPDU filter is used?
23. Can I use BPDU filter on trunk ports?
24. What is port security?
25. I want to learn only a single mac from the port, what
need to be configured?
26. Can we use spanning port-fast on trunk ports?
27. If management ip address is changed, will user’s
traffic will be dropped?
28. Difference between trunk and access port?
29. What is UDLD and why it is required?
30. What is interface vlan on switch?




bgp

1. BGP is IGP or EGP?
2. BGP is link state or distance vector protocol?
3. BGP uses which port?
4. When to use BGP?
5. Can I use BGP instead of any IGP?
6. Can I run two BGP process on single router?
7. What is Autonomous System?
8. Types of BGP routing table?
9. What is the BGP path selection criteria?
10. Define various BGP path attributes.
11. Why weight doesn’t fall under path attribute category?
12. What is confederation?
13. What is route reflector and why it is required?
14. What is no-synchronization rule?
15. Default BGP timers.
16. When does BGP use 0.0.0.0 router id?
17. Does route reflector come in actual path during traffic
forwarding?
18. What is Site of origin aka SOO?
19. What is the cost of external and internal BGP routes?
20. Can we use local preference outside the autonomous
system?
21. Does it require that BGP router-id should reachable in
cloud?
22. What is recursive lookup in BGP and how it works?
23. What is the meaning of update source loopback?
24. If a static route is advertised in BGP without using
update source what will be the next hop address in update?
25. Define various types of communities and why they are
used?
26. If BGP neighbor state is showing idle what does it mean?
27. In Multihoming scenario if primary link gets fail,
after how long traffic will be shifted to secondary link.
28. I am having two routes for remote destination but only
single route is installing in routing table, what’s the
reason for this?
29. How many links can be assigned for load balancing or
sharing?
30. In eBGP I am establishing my neighbourship with
loopback address but it’s not coming up. Please specify
different reasons for not coming up.
31. Can we redistribute BGP in IGP? Please explain your
answers.
32. What is cluster id?
33. I am receiving updates from eBGP peer, will the next
hop change or not?
34. I am receiving updates from iBGP peer, will the next
hop change or not?
35. A router is receiving same route from two different
eBGP peers. The AS information contains in peer 1 is
{65500, 65550, 65555} and in peer 2 is {65501, 65501}. But
I want to make peer 1 preferred.
36. What is the difference between next-hop-self and update
source loopback?
37. Define loop prevention mechanism in BGP.



mpls and vpn
1. What is the difference between VPN and MPLS?
2. What is MPLS and why it is being so popular in short
time?
3. What is the protocol used by MPLS?
4. MPLS works on which layer?
5. What is the difference between P and PE router?
6. Can I make my PE router as P?
7. Two routers are having 4 equal cost links, how many ldp
sessions will be established?
8. My LDP router id, OSPF router id and BGP router id is
different, will it work to forward the traffic of customers
or not?
9. What is Penultimate Hop Popping and why it is required?
Which router performs the PHP function?
10. I am receiving aggregate label, what does it mean?
11. What are the different types of labels?
12. How to make customer route unique?
13. What is the difference between RD and RT?
14. Can I assign a same RD to two different customers?
15. Is RD travels in route update?
16. My customer is having three branches and all are
attached to three different PEs, In this case can I use the
different vrf names?
17. What is downstream on demand?
18. How to filter MPLS labels?
19. What is the default range of MPLS labels in Cisco
routers
? How to extend that range?
20. Without route reflector can I implement MPLS?
21. What is the difference between VPNv4 and IPv4 address
family?
22. What is MP-iBGP? Can we use normal BGP in lieu of MP-
iBGP?
23. What is LIB, LFIB?
24. What is CEF and without enabling CEF, can we make MPLS
work?
25. I am receiving end to end customer routes on various PE
but not able to ping those routes, what’s could be the
problem?
26. What is explicit null and implicit null?
27. Default timers of LDP?
28. Does LDP require OSPF, IS-IS or BGP?
29. In neighbor discovery command, I am receiving only
xmit, what does it mean?
30. What is transport address?
31. What is the RFC of MPLS?
32. Why MPLS is called multi protocol?
33. What is the difference between MPLS, SSL and IPSec?
34. I am using different vendor products and want to
implement TDP, what type of challenges will you face?
35. Does MPLS support IPv6?
36. Can I use the existing IPv4 MPLS backbone for IPv6?
37. Define various troubleshooting commands in MPLS?
38. What is forward equivalence class aka FEC?
39. What is adjacency table?
40. Difference between MPLS IP and MPLS Label Protocol LDP
command?
41. If MPLS get disable, will it harm my IGP or IPv4
traffic?

Answer Posted / prasad

3 is by ABR and 4 is by ASBR

Is This Answer Correct ?    17 Yes 7 No



Post New Answer       View All Answers


Please Help Members By Posting Answers For Below Questions

Is bash posix compliant?

635


How do I find available ip addresses?

611


What is netsh interface?

544


What is sockets?

632


What is domain name system (dns)?

594






How do you check if smtp port is open?

564


What is shared memory in os?

593


Explain the basic difference between tcp/ip and osi model.

596


Explain how names are translated (resolved) into ip address?

579


What is my router ip?

544


What is unix port?

587


Explain how many hosts can be on each network? Consider a fixed subnet partition of a class b network number that will accommodate at least 76 networks.?

819


What is the equivalent layer or layers of the tcp/ip application layer in terms of osi reference model?

576


Does ip address change with wifi?

576


netmeeting in vista

2037