Interested to Buy Any Domain ? << Click Here >> for more details...
if the transformer at full load have a iron loss =900w and copper loss = 1600w . what percent of the load will the transformer has a maximum efficiency?
- 3 Answers
- 16890 Views
- I also Faced
- E-Mail Answers
Answer Posted / happyboopathy
75%
| Is This Answer Correct ? | 32 Yes | 3 No |
Post New Answer View All Answers
What is the formula for selecting the cabels according to load? How to calculate what sq.mm cabel to be used?
Why current shoots up in the secondary on the knee point voltage during saturation test of CT? How core saturation effects the secondary current (while the primary side is open)? What the logic behind this?
What are the criteria shall be considers for sizing Fuse and MCB? If the rated current is 10Amps what should be the fuse size / MCB Size?
234 MVA Generator 3 phase Short circuit current Values required? Gen set Rating-234 MVA, Gen Voltage-18kv, PF;0.8, Xdv:23.5 %, Transformer Rating-18/380KV, 680MVA,Yndd1 two winding, Step up TR, ZT:35.50 %,X/R 4.33 Gen CB Position, CB open ,Disconnected open, Generator Running Voltage 18 Kv, Bi mistakes generator side earth switch Closed during that time short circuit current level in 3 Phase required, and how to test on site 234MVA Generator Short circuit current,
how many types of motor can be used in washing machine
what is the difference between earth leakage and earth fault?
how point on wave controller works.
What is minimum phase system?
Define the three phase formula fuse.
Why L.T.Cable voltage rating is 1.1kV,where as system voltage is 0.415kV?
What happened if C.T mount at any cable or Bus bar in wrong direction . C.T going on proper work or not . C,T direction is essential thing to properly work.
How to Calculate the Fault Level of Electrical Installation
why we use single core 630mm2 cable for transformer secondary side
What is ST and specify its range of voltage.
is it possible to say motor horsepower number without seeing name plate(when name plate damaged)
