Interested to Buy Any Domain ? << Click Here >> for more details...
What is difference between converter & transducers?
- 4 Answers
- 28033 Views
- I also Faced
- E-Mail Answers
Answer Posted / abdus sattar mollah
Being totally technical,
Transducers=That converts non-electrical measarands into electrical parameter.
Converter=DC to DC changer.
| Is This Answer Correct ? | 4 Yes | 5 No |
Post New Answer View All Answers
A PLC is programmed to drive three motors A, B and C as follows : After running motor A for an hour, motor B should get ON and motor A should get OFF. And after running motor B for an hour, motor C should get ON and motor B should get OFF. And after running motor C for an hour, motor A should get ON and motor C should get OFF. (That is, a cyclic repetition with time period one hour) Now, the second condition is: If any motor gone faulty and is tripped, the consecutive motor should get ON and the faulty (tripped) motor should be eliminated from cyclic repetition. The remaining two motors should bear the cyclic repetition of one hour each. (For healthy motor take logic as high and for tripped motor take logic as low) Now, the third condition is: When motor A load(Amps) exceeds 60% of its rated load, motor B should get ON in parallel to motor A. And when both motors A & B are running in parallel, and if their load exceeds 60% of their rated load, motor C should also start in parallel to A & B. [Here the cyclic repetition is eliminated, until their loads become normal(40%)] [Take logic high(1) for load at 60% and logic low(0) for load at 40%] Now draw a flow chart or a ladder diagram to fulfill the above condition.
why we use cascade control and feed foreword control in 3 element control of boiler drum ?what is feed forward and cascade control system ?
what is metal of piston ring
Specify for Cables - Flame Retardant and Fire Resistant?
why using negative supply for bentley nevada vibration system ?
What is the difference between uv and ir scanners? and what is the workig principle of both
How servomotor controls throttle valve of TURBINE?
What is modbus?
Hi,can anyone help me out with PhD programs related to Instrumentation field?I have a degree in electronic Instrumentation?
Tell me the field calibration procedure step by step with diagram of pressure gauge, pressure switch, pressure transmitter, temperature switch, level switch, flow switch, flow transmitter.
what is the minimum power (P=VI)to produce a spark?
Can anybody tell me which type of question are asked in the interview for the FORMULATION(Pharma) as a instrumentation engineer, & question in building managment system.
What is the PLC configuration in Cement industry?
need instrumentation job completed 1 year trainee ship in mnc pesticide company. now in search of job
What is feed factor and its Importance in cement industry? How we can solve feed factor?.
