Interested to Buy Any Domain ? << Click Here >> for more details...
Why we are designed only 11Kv and 6.6Kv Alternators, not
33Kv Alternators and Power Transmission side we are
designed only 220kv, 120kv, 66kv, 33kv, 11kv, and 440volts,
not 20kv, 50kv, 100kv.
- 2 Answers
- 8026 Views
- I also Faced
- E-Mail Answers
Answer Posted / k.prakashchandra
Insulation vs KV and current vs KV
| Is This Answer Correct ? | 4 Yes | 2 No |
Post New Answer View All Answers
Why hydropower is called renewable source of energy?
we have provided 30 nos. relay contacts in panel.I want to know how do we do the numbering for the relay contacts as per any applicable standards
how to CHECK CT AND PT AT THE FAULT OCCUR IN GENERATOR RELAY PANEL .
What is the need of earthing transformer for delta side of a transformer. (Think of a line section between a star/delta transformer at a grid substation and delta/star transformer at a village. An earthing transformer is there at the delta side of the star/delta transformer at grid substation). As there are no ground reference there will not be fault current if a one phase is grounded. Further L-L phase will be sensed by the primary side of star/delta transformer as a L-G fault. So why an earthing transformer is required at delta side
how to carried out DAR test in 11 KV Alternator ?
How to calculate the Harmonics losses in terms of cost/unit.
how we start 40w tube light with 4 diodes,2capacitors,1 choke and without starter.(a product avilable in market which lights burnt tube lights also)
What is the function of under voltage release ?
If I want to buy a new Xformer for my plant what are the main parameter will I need to check?
DEAR SIR/MADAM,CLEARLY EXPLAIN ABOUT CRAWLING AND COGGING EFFECTS IN INDUCTION MOTOR.
1.how many types of relays? 2.difference between ATS& STS?
how to find the multiplication factor for digital energy meter and analog energy meter
state types of reflectors in illumination engg. ???????
On what basis do you decide the ONAN (Oil Natural air natural) or Dry type transformer for a project?
Why the dc voltage drop during starting of emergency lube oil pump? The Voltage drop from 135kv to 125 kv for one min. before re-establish to 135kv?
