Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / nirmalyabasu
If the power is comming through the i/p or o/p device to
the io card then that i/o card is called sinking i/o card.
And if the power is transfered from io card to the i/p and
o/p devices then the i/o card is called sourceing io card
| Is This Answer Correct ? | 12 Yes | 1 No |
Post New Answer View All Answers
Can any one send me IOCL instrumentation question papers.. i dont know the pattern of the questions and what to prepare can any one help me on this .. my email id is anwarnishil@gmail.com
what different types of problems do occur while doing instrumentation commisioning and how to solve them? please explain in detail
how to turbine speed measurement?
Tell me the field calibration procedure step by step with diagram of pressure gauge, pressure switch, pressure transmitter, temperature switch, level switch, flow switch, flow transmitter.
what is the advantage of submersible level transmitter compare to ultrasonic level transmitter?
There are two chlorination tonners both are connected to two pressure swithes and the pressure switch is connected to SOV which operates the valve to changeover the tonner selection i.e if pressure one tonner goes low the other tonner should come in line if it is inautomatic selection design a circuit using relays ?
why we use 3 wire rtd direct wiring for temperature measurement instead of temperature transmitter like bearing temperature
Draw a group of instruments interlocked to a Pump & Motor?
How to calibrate Magnetic flow Transmitter in Field
what is easiest way to read STL language in PLC?
What is 1:1 redundancy ?
The Design Calculation of Level Transmitter For Different Structure open & Closed Vessel, Eg. Diff. Level Tx., Capacitance For Continous Operation
Type of level transmitter commnly used in Procees area are the following. a.________________This type of level transmitter works as follows
When doing a liquid seal on a differential flow transmitter , most of the time the sealing liquid will be heavier then the process fluid. For wich application will the sealing liquid be lighter than the process fluid if transmitter is mounted below the process line.
What care will you take in the installation of control valves,SCADA,DCS and FOC in Oil and Gas Project?
