Interested to Buy Any Domain ? << Click Here >> for more details...
What are the chemicals are required for cooling tower
passivation?
Please mail me in my Email id:-nsput2000@gmail.com
- 3 Answers
- 7104 Views
- I also Faced
- E-Mail Answers
Answer Posted / atul $onawane
while passivation oxygen is rwemoved using sulfite to avoid
further corrosion of cooling tower parts and then chloride
cycle dealkylation process (using ion exchange
process)carbonate and bicarbonates are removed. ion exchange
process treates pretreated water.(i.e softened water using
chemical such as zeolite.)
| Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
solution =2oolitre ,solute =Polyelectrolyte,Solution=water ,we have to prepare 1% solution.how much solute And Solvent?
what is designing step of heat exchanger
send previousyear question paper for ongc gt 2011 chemical engineering written exam
How do you design a vapor-liquid separator or a flash drum?
What is load?
While there, are many tests available to detect leaks on vessels, is there a technology available to quantify the leak, or measure the flow through a leak?
What are some common precipitating agents used to remove metals from aqueous waste streams?
I want to know that what type of questions may be come for fertilizer company for written exam?
What is the basic difference between dispersion & distribution in any polymer blend or alloy??
On what basis are materials to be crushed evaluated apart from size?
What type of pump may be appropriate for a liquid near saturation, a low flow rate, and very limited npsha?
In a Furnace arch pressure is more than Hearth pressure,then how flue gas travels to stack
Hi.. Me going to tke test for management trainee(technical) Post I am an chemical engineering student . Can u guide how to prepare for this test.Can u send me test paper pattern..?
We are having proplem with the persperation smell in ETT/ECHO room in our cardiac hospital.The 2 Ton of AC is not conditioning the environment. We have to use exhaust fan to through out of the room bad air. Could anyone suggest how to coup with this effectively using chemical engineering. Any permanent solution to neutralise the bad smell.The Air freshners are not doing enough instead making a bad odour.
The process conditions of the fuel gas are as follows: Temperature = 25 deg C Pressure = 4 bar g Calculate the line size for the fuel gas supply line to the superheater
