Interested to Buy Any Domain ? << Click Here >> for more details...
Can transformer develop three phase power from a single
phase source?
- 12 Answers
- 20279 Views
- ONGC, I also Faced
- E-Mail Answers
Answer Posted / aaman samal
FROM SINGLE PHASE TRANSFORMER 3 PHASE CAN BE OBTAINED BY
USING A PHASE SPLITER WHICH WILL MAKE THREE DIFFERENT PHASE
SEQUENCE.
| Is This Answer Correct ? | 1 Yes | 1 No |
Post New Answer View All Answers
what r substations?what r there work?why voltages r incresed and then reduced during distribution of power
sourse is 66 KV / 350 MVA, transfarmer is 1000 KVA 6.6 / 0.415 kv, iF fault is 28.75 MVA on 0.415 KV Bus then calculat the Transfarmer Impidance
What is core CT & it's function?
What is the reason for using a GE G101 MCB in place of an EP102 MCB if both are capable of AC circuit protection?
Please, if 1kw is equal to 1.25kva; how then do I know how many kva in 7.5kw?
How to calculate the multiplying factor for energy meter with ct ratio given
for a 500 KVA connected load, I calculated 30% of capactor for power correction. Even after using 225 KVR capactor PF is not improving. What could be reason for low Phase correction factor?
Do u know any one? how to find out in motor rated amps? formula?
What is different between resistance grounding system and resistance earthing system?
1.what is mean by 8/20 micro sec waveshape
in a solar power plant,we are going to step up the voltage 350V to 33kv, and to 132kv GSS. i want to ask that if it is possible that 315v/33kv is not possible because we also use 315v/11kv. or it should be 415v/33kv? is it effects generation or losses? the second question is-generation is depends on LV winding? or LV winding design for generation voltage?
i want bhel placement paper for electrical if anybody having pl send to my id kavitha867@myway.com immediately
Thumb rule of cable size(rm>30 rm)X multiplying factor=ampere
How two nos. 130 kw D.C motor get synchronise using D.C drive.
Brushes are placed at magnetically neutral axis,when brushes reach that point,the armature conductor gets shorted,but it can be seen that the dc supply is also shorted,wont that get damage? help me plz
