Interested to Buy Any Domain ? << Click Here >> for more details...
Is there any option to replace two Genset of capacity 125KVA
with one higher capacity for same office?
- 8 Answers
- 9354 Views
- I also Faced
- E-Mail Answers
Answer Posted / raghavan
Dear William,
Thanks for your suggestion. let me start pondering more info
on this. will keep updated on this process status.
| Is This Answer Correct ? | 0 Yes | 0 No |
Post New Answer View All Answers
In power transmission using open belts or horizontal shafts it is preferable to have the slack side of the belt on the top because
Installation method of self treated earth electrode.
which mm cable should be used for 1.hp immersible pump motor for the distance of 330 metres?
If we use 250A MCCB as a incomer in Control panel for a fault level of 50kA for one second ,assuming temperature rise from 85 Deg. to 100 Deg , Then what will be the Aluminium Bus-bar size for 250A MCCB? Explain in detail.
If we have to feed a housing complex having load 8MVA, than what would be the better option, either we first step down 33kv supply into 11kv & than 430v or we proposed no of 33/.44 kv transformer, also which option is economical?
What is Auto Mains Failure Panel & Auto Synchronizing Panel
what is the Connected Load (kW) or Contract Demand (kVA)of mahindra nasik plant??
54 Comments Alok and Bhanu play the following min-max game. Given the expression N = 38 + X*(Y – Z) where X, Y and Z are variables representing single digits (0 to 9), Alok would like to maximize N while Bhanu would like to minimize it. Towards this end, Alok chooses a single digit number and Bhanu substitutes this for a variable of her choice (X, Y or Z). Alok then chooses the next value and Bhanu, the variable to substitute the value. Finally Alok proposes the value for the remaining variable. Assuming both play to their optimal strategies, the value of N at the end of the game would be?
what is transformor oil gread
Explain marx circuit.
how to setting voltage RTCC panel
When distance between two pulleys is not fixed, the tension of belt is adjusted by a) driver shaft b) driven shaft c) adjustment screw d) belt
hey guys i scored 910 on GRE and 67 on TOEFL respectively.I have an aggregate of about 74%in my B tech.For which colleges should i apply for an MS program in electrical engineering.I am looking for colleges in NJ,SC,NC,GEORGIA, NY. Please reply with a good response.....
please tell me, how i clear the objective test? when i studied form the one book after i solved the objective ,that time i solved that qes. but if i tried solve objective form the other book then i could not solved these que.
1. What is maximum permissible distance between smoke detectors ? 2. How do we decide number of smoke detectors required in a large office, warehouse, hall etc ? 3. What should be maximum height of smoke detectors ? 4. Where do we use heat detector, optical smoke detector, temperature sensitive detector ?
