Interested to Buy Any Domain ? << Click Here >> for more details...
what is the difference between the 94 lockout relay and 86
lock out relay. I have noticed that the 94 lockout relay is
activated when the distance realy is activated and 86 is
activated when the 87T differential is activated. but why
can't the same lockouts be used for both the protection
schemes
- 10 Answers
- 72857 Views
- ABB, I also Faced
- E-Mail Answers
Answer Posted / k.prakashchandra
94 lockout relay is for line fault only. 86 lockout relay
is master trip relay. It trips both primry and secondary of
the transformer as the fault is of serious nature.
| Is This Answer Correct ? | 2 Yes | 12 No |
Post New Answer View All Answers
I have 1500/1A CT If i connect this CT in 6.6KV bus bar means what will be the voltage present in CT?
What is CCT (Correlated Color Temperature) ?
Operation of isolators.
After taking shutdown of 11kv feeder, if you see 5kv by phasing stick in the cable side, is it possible to close earth switch in cable.
What is resonant peak?
How stabilizer works??
Please help me regarding my one concern. - During earth pit testing we noticed that the Clean earth pit and dirty earth pit showing continuity (Resistance value - 5ohm) . I want to know that if both earth pit have separate location and there is not internal looping between PIT then why such continuity is showing on it . Because of this issue the field side all earthing point showing short. In PLC panel we are providing two types of earthing cable which is coming from separate earth pit (Clean and Dirty earth pit) because of earth PIT showing short our PLC is not complying spec . please help regarding this issues.
What is process of anneling transformer core
temp of cast resin 1500kva tx formerwent up to 138.c but came down very fast to about 100.c within 20 mins when load was reduced from 70% to 60%
List the time domain specifications.
What are operating procudures & Safety precautions to be observed while operating OLTC in manual mode ?
Give me the calculation steps to design an electromagnet to be work in 230V 50 Hz AC Supply. Also give force that is created by that electromagnet when it gets energized.
what is the difference between an alternator and a synchronous motor
what's the exact magnitude of current, flows through Neutral?
What is method of calculating the fault current for a MDB, 50KW, 3PH, 415V, 50HZ?
