Answer Posted / parul
it refer to the sources and uses of funds receieved through
the year.
| Is This Answer Correct ? | 5 Yes | 6 No |
Post New Answer View All Answers
i want sample inteview question of chemical engg for BARC
How fouling effected the heat transfer rate?
MY generator water cooler inlet line height - 11 mtr inlet water line height - 7 mtr water come into the line from overhead tank, O/H tank height - 20 mtr the first tapping in the inlet line is 2" line which down to 4 mtr level plateform., second tapping in inlet water line goes to a pump 6" line installed at 4 mtr level plateform, pump capacity 200m3/hr, head- 30 mtr, hp-40. the outlet of pump of 6" water line connected to a header of 6 mtr long of 6" line, on this header the six tapping are connected, 4 nos. 3" line goes to 11 mtr height water cooler the pressure of the line is 0.15 to 0.25 kg/cm2, 2" and 4" pipe line connected to a cooler at 4 mtrlevel plateform. my question is, at 11 mtr height level the quantity of water and flow is not sufficient for my cooler, the temp. of cooler is rises much more. you are requested to suggest the modification of pipe line/ pump for take more water flow and pressure (desired pressure is 1 kg/cm2)
Why should a magnesium ribbon be cleaned before burning in air?
Explain what type of pump may be appropriate for a liquid near saturation, a low flow rate, and very limited npsha (net positive suction head available)?
What are some guidelines for sizing a psv for a fire scenario on a vessel in a refinery service?
What is some common piping materials used to transport slurries?
What is the purpose of capacitor?
Define viscosity?
We are having proplem with the persperation smell in ETT/ECHO room in our cardiac hospital.The 2 Ton of AC is not conditioning the environment. We have to use exhaust fan to through out of the room bad air. Could anyone suggest how to coup with this effectively using chemical engineering. Any permanent solution to neutralise the bad smell.The Air freshners are not doing enough instead making a bad odour.
Why should chemical equation be balanced?
Explain what types of valves are recommended for slurry services?
What is the process of including heat exchangers in ammonia refrigeration system?
What is the wet bulb globe temperature?
what is AZ431 & how to check it by using multimeter?