Answer Posted / avinash
ac generator is called as alternator
| Is This Answer Correct ? | 3 Yes | 2 No |
Post New Answer View All Answers
would the same effect be achieved by reversing the connection to one winding of the induction motor 3-phase?
What happen to the transformer if the OLTC frequently used for lower and raise occured 50times daily?
what is EIB lighting control system? what is the advantages of this system?
What is industrial plc
Define what is the function of anti-pumping in circuit breaker?
What types of high speed CMOS circuits have you designed?
Is potential difference materials property ..? if yes tnen how.. explain brifly.
how i calculate the syncrones generator NGR resistance .if we have a 6mw generator line voltage of generator 11kv also line current 393.3 ampere.
what is the Transformer Impedence?How can calculate?
what is earthing transformer? draw the winding dia.of earthing transformer.
i need to now what will be the cable size to the following load, transformer to distribution panel distance 110m, load 1000kw, voltage 400v, pf 0.85, permissible voltage drop 2.0%, overhead line, atmospheric temperature 35 degree c.
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
how the synchronizing is obtained at bus couplers in grid substation? (because there we cannot change the frequency in one of transmission lines like in generator synchronization)
How to convert 2 phase to 3 phase electricpower in induction moter?
700KW 6.6KV slip ring induction motor to use VFD to control the speed
