Interested to Buy Any Domain ? << Click Here >> for more details...
How to calculate the no of bags required for 12mm thick 1:6
plastering?
- 10 Answers
- 118948 Views
- Raj Construction, I also Faced
- E-Mail Answers
Answer Posted / manish katiyari
finished volume=12mm = 0.012m =1.2m3
prop 1:6=1+6=7
cement req= 1.2/7
=0.17143
1cement bag=34.5 litres
=0.0345m3
cement bag req= 0.17143/0.0345
= 4.97 bags
approx = 5 bags
| Is This Answer Correct ? | 16 Yes | 20 No |
Post New Answer View All Answers
what is relation between SPT N value and driving piles after conducting a soil test?
2. In a container filled with each of the following materials, at a porosity of 40%, determine the upward gradient required to cause the quick condition (a) Lead shot with a G = 13.75; (b) Fibre beads with G = 2.15; (c) Sand with a G = 2.32
What is meaning of Canceled/Flat Beam. What is difference between them? Both type of beam can bear same load if size (width)of the flat beam is increases and depth is same as slab thickness? Kindly suggest to me.
What in your opinion makes you the most suitably qualified candidate for this post of civil engineering technician?
which is the cheapest type of flooring (say for using for 6 months in a factory building & dismantling it)?
The building has 12 columns of 12x9 in 3 rows of 4 each in a plot of 50'x30', The central row is strengthened with 16mm twisted rods. The roof area is 1500 sft including balconies. calculate the load factor per sft. Also indicate the number of roofs the building can withstand.
How to calculate the force on a column of three story building. What should be the base concrete height?.
rate analysis hiring of generator 62.5 KVA
1)Why we can use half brick in 4inch wall and 2)why not in 9+inch brick wall
60-70 grade of Bitumen is VG-30 ?
HOW MANY BAGS OF CEMEMT USED IN PER M2 OF PARTITION WALL
Use of coping on terrace wall and in 4" wall is compulsory or not ?
For The preparation of goverment examination Which book i will prefer and by which way i will do the preparation for exam.
why we provide bent up reinforcement bars at l/4 ? if it is because of diagonal shear , how does it acts ?
How to determine thee cut length for steel reinforcement bars in R.C.C design
