Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / susil parida
Diode is a passive element
| Is This Answer Correct ? | 24 Yes | 5 No |
Post New Answer View All Answers
Refernce currents are to be generated using refernce cueernts how can this be done??
What is the relationship between voltage,current & frequency?
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
what is servo motor & how does it work.
why it is not advisable to run low rating (19KVA) DG sets in parallel for long durations even though they are provided with droop ckts (QDC)
I am inpecting a 10kVA UPS what tests should i do and should i observe?
Comparision of Air break circuit breaker, SF6 Circuit breaker and vacuum circuit breaker.
What is the implications when 600 hp motor is started when the unit is running with Transformer of capacity 1500 KVA and DG set of 1000kva
I have made a 3 phase thyristor full bridge rectifier. But at the moment it is working only for the half bridge operation. Both the half bridges are on operation separately but when i put it into full bridge operation the oscilloscope output is zero. I rechecked that the pulses are correct for each thyristor. what could be the possible reason for this?
how to calculate the formula of cable size if motor kw is given
why would amp draw on neutral wire be as much as amp draw on the hot leg.
Whar is the KvA rating of 33Kv substation & actual kv rating of power generaating station.
What is the difference between the impedance percent and impedance voltage ?
how i can calculate the size for fire cable
Who are the manufactures those manufacturing 3Cx2.5sqmm FRLS cables. I heard about FRLS technology adopted only in wires useful for wirings
