Interested to Buy Any Domain ? << Click Here >> for more details...
why the frequency in india is 50 50HZ why we not select the
o ther frequncy range?
- 6 Answers
- 10279 Views
- I also Faced
- E-Mail Answers
Answer Posted / ghuest
Then what about 60 hz in saudi and america
| Is This Answer Correct ? | 3 Yes | 2 No |
Post New Answer View All Answers
What should be the protection scheme for a 15kw, 3-phase motor working in a lathe machine.
1. Why is the speed of shunt motor practically constant? 2. Why dc series motor use to start with heavy loads? 3. advantages & disadvantages of separately excited generator over self excited generator?
Why it need to form a capcitor when it not been in use from three or two year. Plz describe it technically.
A cotter joint is generally used to transmit
What is the working mechanism of OLTC in Power Transformers????
plz send me the procedure and syllabus for mseb exam
what is the write prosidure of stringing of 8meter pcc pole.
WHY IN AC DRIVES,INPUT PHASE CURRENT SHOW UNBALANCE?
how we calculate the dick for a pole?
Thermal withstand capability under full short circuit conditions, in terms of number of times of occurrence of short circuit and corresponding anticipated percentage reduction in transformer life.
Why IR value of the (HT cable Plus synchronous motor) is less while individually having IR values in GΩ?
Why is the starting current high in dc motor?
We are preparing another project which involves Waste heat recovery from a 1 MW GE Engine. The Engine in particular gives out flue gas at 487Deg C with a flow rate of 5650 kg/hour and this can be cooled to 180 Deg C. This gives a thermal output of ~ 594 KW that is available for input to VAM via heat exchanger / boiler. Additionally 581 KW will be available from engine jacket water (temperature profile 80/ 80 Deg C and a flow rate of 50m3/hr) Our estimation is that 300 TR of cooling is possible with a suitable VAM machine(s). Please advise what is the most suitable arrangement with maximum TR and min Capital expenditure. plz reply me as early as possible
What are IR values and what it should be for coil and for insulator
What are different types of control systems?
