Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / guest
VCB is batter than ACB.in hv side VCB is used & Lv side ACB is used current rapturing in vacuum is more effective than air
| Is This Answer Correct ? | 16 Yes | 2 No |
Post New Answer View All Answers
how are reversing the direction of rotation of dc motor
difference between Ac and Dc mcb ????
at what basis/standard we have to arrive the current density of aluminium/ copper in busbar?
we have require a Motor (1500kW, 6.6kV, 50Hz) which shall operate at 1500rpm during 30min and after it shall run on 500rpm during 15min. The same cycle shall be repetitive during the whole working days. Which method is best and economic to achieve such type of task. VFD, VVFD, Pole changing motor etc.
Some times to change of DOR of a motor, interchange of R & B is not effected and RYB take same current, but interchange of R&Y is effected ie change the DOR. My doubt is what is the problem in motor and how it is happen.
Why electrical power generation and transmission done in 3 phase system not more than 3 phase ?
I have 2500KVA transformer delta/star,13.8KV/380V provided with LV 4000A breaker. Already I have 2300KW motor feeder with a full load 90%. Is it possible to connect another 1600A from that breaker? If so how the calculation is done?
how to calculate transformer turn primary & secondary side 11kv to 420v
we have a lot of model of rectifier but thyristor rectifier is the most rectifier that use in power system. Do you know why this rectifier is used?
What is the difference between earthing,ground&nutral?
what is gas turbine intercooling ?
What is the difference between the relay and the circuit breaker?
Differentiate between ideal and non-ideal voltage sources?
I have a drawing of a wound rotor induction motor for a crane. This crane motor has 5 forward speeds & 5 reverse speed implemented of course with different amount of resistance for each speed setting selected. What has got me scratching around is the fact that 8 of the 10 speed selections switch in uneven (unbalanced) amounts of resistances on each of the 3 connections to the motor's rotor.Can this be possible? I would have assumed this would produce unbalanced rotor currents and therefore vibration in the motor. I would greatly appreciate anyone's comments on this. Many thanks, Confused.
What are the properties of a resistor?
