Answer Posted / muralidhar

m10-1:3:6
m15-1:2:4
m20-1:3/2:3
m25-1:1:2

what is the proper procedure in conducting a california bearing ratio penetration test on soil on cbr machine?

2106

---

density of crush sand & crush stone or grit powder

6797

---

What is the tensile strength of wood?

1211

---

how much cement is consumed by a stone masonry wall 17.7m long,0.55m wide and 1m high

1916

---

What are the composition of a landfill?

1256

---

what is the use in canals of longitudinal drains and cross drains in lining areas?

1953

---

How many types of slabs are there & how to design it?

1307

---

How much area, in square meters, will one liter of paint cover if it is brushed out to uniform thickness of 100 microns?

1560

---

In tower foundation, on the time of 3 mtr pit RCC casting if water and mud is their surface of PCC then what will be do?

2522

---

What are your future hopes for this job?

2318

---

For a washout valve why are two gate valves required in normal practice?

1163

---

What are advancements in civil engineering?

1073

---

If we are providing concrete joint in every 10m with water stopper in water tank wall then is it necessary to cut the steel at joint section?

1841

---

What is the force exerted by the tacoma narrows bridge?

1251

---

2. In a container filled with each of the following materials, at a porosity of 40%, determine the upward gradient required to cause the quick condition (a) Lead shot with a G = 13.75; (b) Fibre beads with G = 2.15; (c) Sand with a G = 2.32

2455

---