Interested to Buy Any Domain ? << Click Here >> for more details...
What is the voltage b/w nutral and earth
- 11 Answers
- 18081 Views
- Mind Space, I also Faced
- E-Mail Answers
Answer Posted / parvesh1989
0.001 OHM,
because when a body is earth, its attains a zero potential
or potential of earth.
Another answer is 0 to 4 volt properly.
| Is This Answer Correct ? | 1 Yes | 3 No |
Post New Answer View All Answers
what is the effect of connecting three phase supply lines to three phase auto transformer output terminals through a fuse of 10Amp and a circuit breaker (MCB). Is this connection permanently destroy the transformer?
what is the purpose of shading ring or shading coil in electrical equipments.
what transformer we used normally and upto which kva?
If any HVDC line is going with positive & negative(the negative usually have return path of current with earthing electrode). Now the question is if this HVDC earthed electrode which is using as return path and earthed any nearby 400kv or 220kv AC substation equipments. which will be the impact of this on AC substation & its equipment, how severe may be this and what should be the minimum distance require between HVDC earthed electrode and AC substation equipments? It's really an high engineering level question...Dare to answer and increase your knowledge.
What are dependent sources?
we use 400/5A ct and 35/roor3KV,/0.1/root3KV,0.1/root3KV pt ratio. What is the multiple factor of this meter.
What are the temperature elements?
why can we use cosine wave instead of sine in ac supply as both have same rms vale and ripple factor
how withstand of hi-pot test outputs of transformer wire 2.5mm
what are the major & minor faults that occur in an inverter and in UPS ? And how to repair and resolve them ?
what is apparent poewr, reactive power, & active power?
How can we design a HVAC Plant room which includes AHU,FCU,Chillers,Cooling towers, Pumps etc & how will they work? any Drawing if possible?
Why we are using Isolation Power Transformer inplace of commercial power transformer? What's the difference between them?
what is the difference between c power and U power acb breaker
HELLO EVERYONE, I RECENTLY HAVE FOUND ONE PROBLEM, I WAS TAKING NO LOAD TRIAL OF AN HT MOTOR 920 MOTOR , 1440 RPM , 6.6 KV, WITH AUTO TRANSFORMER. AT 450 V, LOAD WAS 40 AMP AND SPEED WAS 250 RPM. BUT AS WE INCREASE VOLTAGE FROM 450 TO 480V, LOAD BECOME 41 AND SPEED REDUCED TO SOME RPM . SO WHICH PHENOMENON ACTED HERE FOR REDUCING SPEED.?? AND IS IT HAPPENING ALWAYS OR IT IS RARE? I ALSO HAVE FACED SUCH PROBLEM WITH FEW LT MOTOR ALSO.
