in which direction real power and reactive power flow and
why???????
- 3 Answers
- 9067 Views
- I also Faced
- E-Mail Answers
Answer Posted / gajanan
if you are asking about induction generator then p flows
towards grid and Q flows towards motor. bcoz for creating
magnetic field motor require Q and after speeding it above
Ns it supplies p to grid.
| Is This Answer Correct ? | 5 Yes | 0 No |
Post New Answer View All Answers
what is d check in dg 1500kva
How dia computation perfomed in cold rolling mills .
What is notching in dc machine?
Why in metering Ct for ammeters ct secondary side is grounded for each Ct but not in case of CBCT (Core balance current transformer)..kindly some1 highlights the reason..is it because net flux is zero?
why the frequency and voltage in india is 230v and 50HZ. when compared to USA say 110v and 60 HZ.
WHAT IS DOL STARTER? HOW IT WORK? GIVE ITS CONTROL AND POWER DIAGRAM .
A commercial Building is designed with 14th floor levels with indoor substation of three phase transformer with rated capacity of 1000 Kva.The transformer delivered 65% of its rated capacity at 0.67 power factor lagging.Because of low power factor, the power customer was penalized and certain cost was charged accordingly based on every point percentage lower than 85%.This situation may repeatedly happen on the succeding energy bills of power customer.The power customer is desired to improve its historical power factor of 0.67 lagging and no further penalty be impose by the local power company on the next bill. Q: Identify the appropriate solution you want to offer to Client?.Justify SCIENTIFICALLY and MATHEMATICALLY the principles behind the solution.
how can get electrical c licence.now i am working in spining mill , transformer capacity 2750KVA. SANCTION DEMAND 2250KVA. PLEASE ADVISE ME . MY CONTACT NO 09944226823
Dear sirs, pls check this 4-20ma to RS485 module datasheet,pls guve me some suggestions. http://www.szsunyuan.com/sy/pro_more.asp?Productid=539 Thanks. E-mail:yunianjiang99@gmail.com
How is the percentage impedence of a transformer fixed at design stage???
Do closed loops systems require manual input?
how much allowable resistance that can be difference in motor all coils?
Do closed loop systems require manual input?
what is Insulation monitoring device. where it is used? (in switchgear room or control panel or in field equipment)
can we find the inductance of a induction motor?
