Interested to Buy Any Domain ? << Click Here >> for more details...
Which instrument used to calibrate the pressure switch?
- 8 Answers
- 12031 Views
- I also Faced
- E-Mail Answers
Answer Posted / biswarup das
Answer 1 and 2 is absolutely right .
another way is to use comparison tester.
| Is This Answer Correct ? | 7 Yes | 2 No |
Post New Answer View All Answers
Can please tell mi about SIOS, PRM, SERVER, and what is the diference between PIN LAN, PCS LAN,APC Server, and please send the Doc if possible for referance,mail id patil_amit17@yahoo.com
A DP transmitter is used to measure the level of an open tank. The drain line of the tank is connected to a control valve, and is configured as, if the level of the tank is 90% the valve should get open 10%. And if the tank level is 10%, the valve should get open 90%. Draw wiring diagram and explain how to configure DP transmitter and control valve using HART communicator. If the span error at output is 1%, what will be the %opening of the control valve at 60% level of the tank?
where uses EXe /EXd/Exo/Exn/Exp/Exq/EXia
How can test or measure the probe and extension cable to identify if the problem at the probe or cable or at the driver it self? (pleast notify the measuring method)
how to work MIL contol valve posistioner ?
what is difference between HOT permit and cold permit
while i check zero check for dp flow transmitter some fluctuating came (0 to 458 kg/h) what is the reason?
What are different types of control valves?
If a warning lamp will operate with the ground circuit is bypassed with a jumper wire to ground, what should you check?
basic connection and principle of axial shift sensor n differential sensors in tubine describes n draw......
Difference between dcs and plc including date processing and architecture.
How to Calibrate Level Switch in field
Definition of reverse and acting controllers:
How to Calibrate Interface Level Troll in field
Speedtronic system .
