how you confirm the hard stratum for driven cat in situ
pile work?
- 2 Answers
- 6095 Views
- I also Faced
- E-Mail Answers
Answer Posted / sjtbehera
You may check the stone that takes boiler that driven in to
bores.
| Is This Answer Correct ? | 3 Yes | 1 No |
Post New Answer View All Answers
manhole chamber having height of 2300 mm and thickness of brickwork is 230 mm and dia of opening covering is 560 mm and bottom length vertical is 1500 mm (1:4) brick masonry and plaster 12 mm on both sides..how to estimate the no bricks used with mortar cement bags and sand for total chamber including plaster.
plz.show development and anchorage length in simple diagram.
cud any one send me tech quest paper(civil engg) at tarizus@yahoo.com
Draw a neat sketch showing the 'throat' of a welding in a plate girder ?
5. Two long boundary walls run parallel to each other at a center to center distance of 1 meter apart. The width and height of the first wall are 0.30 m and 2.5m respectively. While those of the second are respectively 0.18m and 3.5m. Plot the distribution of vertical stress intensity due to walls on a horizontal plane, 1m below ground level. The walls have negligible depth of foundation and are made of brick masonry (y = 19.2 kN/m cu)
Can anybody explain with the help of sketeches that what are 2legged , four legged & 6legged stirrups and how to calculate cut length of diamond ring(stirrups)?
In how many types u can do POP on ceiling and walls(on which material or by using which material)? b) what is the difference between dry , oil bound, enamel, acrlyic type of painting? 2nd :- I have certain queries, please help to solve. a) length of pile bore is 4m.excavation quantity will be area * length where area will be pi/4 * dia*dia. Is this right? b) It is a single reamed pile of 300m dia and reamed dia is 750mm. can any body help me to calculate excavated quantity of this bulb(reamed section),, concrete quantity in bulb with showing the formulas to be used?
what is the 0 value in quantity surveying
What is Density of cement, sand & aggregate ?
While calculating the weight of the steel per running meter, the formula used is [(dxd)/162]. Why 162 is used in denominator & how it is derived?
HOw much % of premium on DSR-2013 currently
VAT and CST ? Which benefits for buyer ? Why benefits?
What is the strength of 1:6:12 mix?
Which is the latest version of solidsworks?
I need to constructive work in amaraj batteries
