Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / anuj kumar
pile foundation is a type of deep foundation used in a case
of silty,soft and clayey soils which are driven or hammered
through the soil to a considerable hard strata beneath soil
surfaces and transmitting top and minimal loads of super
structures into the ground.These are generally used where
soil is not having good bearing capacity at lower depths or
is not at all present at lower depths as in the case of
houses constructed over submerged area.
| Is This Answer Correct ? | 10 Yes | 3 No |
Post New Answer View All Answers
what is the metal ratio in granular subbase coarse for one cum ? And please explain the morth table ...what is the difference between grading 1 , 2, 3 what it means..plz explain
1.what type of the rock is most suitable for wet mix macadam in construction of road? 2.what is the highest maximum dry density and optimum moisture content can be acheive by using most suitable crush rock?
How we can calculate the cement, sand,bricks , water , quintity in 1:6 Ratio 1 cubic metre b/w and 1:4 Ratio in 1 Squre metre b/w????
What is the distance between railway tracks?
how to caliculate required amount of cement and sand required for 1cu.m.
115mm thickness brick work how to required mortar
though u r a civil engineer, y r u interested in tcs???
For elevated service Reservoirs what will be the output of each skilled carpenter and bar bender.
what is the cost differene of a same structure when it is constructed with brick masonary, and when it is constructed with concrete as a frame structure.????????
Give me an example of a time when something you tried to accomplish and failed.
one steel fixers how much ton steel fabrication he will do same how much tone he will binding?
When column of building is abutting the boundary line,then suitable footing advised is
what is the water cement ratio of 1:6 and 1:4 cement sand mortar. reply soon
How high should the water tank be to provide a 60 psi at base of this water tower?
For a washout valve why are two gate valves required in normal practice?
