Interested to Buy Any Domain ? << Click Here >> for more details...
what is the function of breather in a transformer
- 29 Answers
- 116513 Views
- Areva, Bhel, RKM Powergen, Vijai Electricals, I also Faced
- E-Mail Answers
Answer Posted / dipak
Breather provides economic and efficient means of
controlling the level of moisture entering electrical
equipment during the change in volume of the cooling medium
and/or airspace caused by temperature gradients.
| Is This Answer Correct ? | 5 Yes | 2 No |
Post New Answer View All Answers
What are motor generator sets and explain the different ways the motor generator set can be used ?
Why a Permanent Magnet Generator has higher frequency as compared to frequency of main alternator?
What is the function of under voltage release ?
When will you multiply and devide with derating factors to the actual value while sizing the cable?
what is strip power factor?
we have provided 30 nos. relay contacts in panel.I want to know how do we do the numbering for the relay contacts as per any applicable standards
What are the causes for the failures of sandwich type (Al) busducts?
A 15 kw squirrel cage motor having a maximum efficiency of 90% on a continuous full load has temperature rise of 42 degrees celcius after 30 min and 52 degrees celcius after 1 hr under the above operation conditions. a) calculate its final steady state temperature rise on continuous load and the heating time constatnt. b) if the motor is operated on a short load for 9 min estimate its temperature rise. c) calculate the maximum overload that can be applied on a short, 9 min rating so that the temperature rise is the same as the final steady state temperature rise on continuous load.
What will be the voltage regulation of a full load and 0.80 power factor lagging load transformer when a two winding single phase transformer has a voltage regulation of 4.5% at full load and unity power factor?
Explain mechanical rotational system?
Why in metering Ct for ammeters ct secondary side is grounded for each Ct but not in case of CBCT (Core balance current transformer)..kindly some1 highlights the reason..is it because net flux is zero?
in non technical way how can u define POWER FACTOR??
Whats the minimum value for I.R. that can be allowed for HT & LT alternators for operation?
Is it possible to download the Siemens Selection Chart(TYPE 2 coordination) for 1) fuseless selection 2)Fuse selection
plese send me the oces/dgfs sylabus and previous year question pattern of electrical engg.?
