Interested to Buy Any Domain ? << Click Here >> for more details...
Answer Posted / basudeb sarker
The PMG is rotated by the prime mover and cuts the field
windings of the pilot exciter, which induces high frequency
1ph A.C in these windings. This is the starting point of
generating a voltage
This voltage is fed to the AVR where it is regulated and
rectified and its D.C output fed to the main exciter field
windings.
| Is This Answer Correct ? | 9 Yes | 7 No |
Post New Answer View All Answers
defult setting in p220 micom motor proction relay for 11kv,640kw,f.l.a.-40a,1440rpm ht motor?
what are the reasons of CT circuit faulty in busbar protection scheme?
A 100 kVA , 400 v/250 kv testing transformer has 8% leakage reactance and resistance on 100 KVA base . A cable has to be tested at 500 kv using the above transformer as a resonant transformer at 50 hz . if the charging current of the cable at 500 kv is 0.4 A find the series inductance required . Assume 2% resistance for the inductor to be used and the connecting leads . Neglect dielectric loss of hte cable . what will be the input voltage to the transformer ?
How RTCC panel is working and give single line diagram for RTCC with transformer?
Main advantage of auto transformer over two windings transformer is that A it needs no cooling B it uses only one winding C core losses are reduced D it has simple construction
How to synchronization will be done between two DGs ?
we have 3.5MVA-11/6KV transformer. how can we calculate earth fault current and NGR calculation?
Why are the cores of large transformers built up of circular transactions ?
Why is voltage is required to be within permissible range for an electrical equipment?
What is FM200 Gas??Applications........
in our all power plant have connected in grid and grid voltage and plant voltage is same, but as per as electrical concept the power will transmit from high potential to low potential but here altough same,then how power transmit from power plant to grid.
what is difference between speed mode and torque mode in motor?? explain in simple words please.
in dc shunt motor if field winding is shorted then
Saving in copper achieved by converting a 2 winding transformer in to an auto transformer is determined by A voltage transformation ratio B load on secondary C quality of core material D size of transformer core
PLEASE INFORM ABOUT THE IDEAL TEST RESULTS OF MAGNETIC BALANCE TEST OF TRANSFORMER 33/11 kv DELTA-STAR T/F
