Answer Posted / b.suresh
Transforer is a static device, which transfors electrical
energy(v&i)from one circuit to another circuit without
chaining frequency.
Is This Answer Correct ? | 1 Yes | 0 No |
Post New Answer View All Answers
How do we calculate the resistance per metre of single core aluminium stranded cable 19*3.25mm sheathed in pvc,at 15 deg C temperature?
In a power conditoining unit (inverter) of a solar plant when we measure the d.c. current fed by different strings of solar plates to inverter, the current in the negative wire is less almost by 1 ampere to the current in its positive wire say current in positive wire 5 A , then current in negative wire of the same string is 4 A. Since the current entering should be equal to current leaving then why the current is noticably less in negative wire.
How to calculate the sag on transmission Lines.
We have drive feeding an output contactor for a 5000 hp motor @ 5kV application. The motor FLA is 629amps x 1.25% service factor = 786.25 amps The cable that we current have in place between the drive and the output contactor is 350kcmil- MV-105 (parallel cables). Per the NEC table 310.60 (C) (69). This show the cable ampacity is at 615 amps per cable for a rating of 1230 amps. We have derated the cable for the cable tray and the multiple cables application and our calculations show that after the correction factor factor we are at 922amps. 1230 amps x .75% correction factor factor = 922.5 amps. The customer is driving us to then use another safety factor of .25% off of the already derated cable. Can you please provide a longhand calculation for your solution on this application?
why voltage form factor of PT are increase , when it is ecpected heigher spikes in system. how it is calculated.
why connecting surge unit in contactor coil
Define stepper motor. What is the use of stepper motor?
As we use capacitor bank in 3ph ckt to improve PF, can we use capacitor in single ph domestric use, in house we have Fan,Mixer,electric cooker,iron,tube choke they also lag the system,because it is inductive load. if it is possible to improve PF of single ph system-- if yes- type of capacitor to be used,connection diagram, working in detail. if no-- list it.
what is the safty of poly phase tranformer?
Compare salient pole and cylindrical rotor machines.
Let me know that how i calculate the alternator sub tranciant reactance and tranciant reactance.
Explain the terms real power, apparent power and reactive power for ac circuits and also the units used.
working of diesel generator ?
How to size fuse? How to size MCB?
Diagram and details of polarity test for Current Transformer 11kv 400/200/100/1A