Interested to Buy Any Domain ? << Click Here >> for more details...
if only one generator is running in droop mode parrallel
with grid and suddenly grid breaker off what will happen?
It will trip o/u freq or stay as it is? (urgent)
- 10 Answers
- 15176 Views
- I also Faced
- E-Mail Answers
Answer Posted / mr.engineer
If you Have Island mode and you configuer it to switch from
deoop mode to Island mode at Grid tripping time, Your
system dose not effected by O/U freq.
Otherwise your system will trip due to underfrequency.
| Is This Answer Correct ? | 2 Yes | 1 No |
Post New Answer View All Answers
could you measure current in parallel?
Can you explain about Restricited earth fault protection scheme
My question is whether bellow formula is correct to find bus size for 46kA for 0.5 second & what is RT in bellow formula. formula to calculate the size of busbar to withstand the thermal stresses due to currents with duration of 0.2 sec to 5 sec. Sp = RT( I x I x t) / K Where Sp – is the cross sectional area of bus bar in millimeters. I - is the value of AC fault current. t - is the operating time of disconnecting device in seconds. K – is the factor depending on the material of the conductor, insulation and initial and final temperature. Value of ‘k’ for copper is 143.
how to modify DOL control panel into Delta Y connection?
what is circuit breaker in transfomer and where it used
for a 400kv t/m line with 10 ampere current will corona occur?
Can I use distributon class/transmission class Lightning arresots for protecting the building? If not why please explain?
why does the magnetic balance tests at transformer?
Does the direction of rotation of d.c. Shunt motor would get reversed if the armature current and field current both are reversed?
is it necessary to earth the rmu before cutting off the transformer winding?if yes why?
what is the function of capacitor duty contactor in an capacitor panel???
after how many spot we must chang secondry cable in portable spot welding gun?
what is the difference between "Rotary bypass isolation switch and Normal bypass switch" pls share indepth techs?
Scott connection is used for A 3-phase to 2-phase conversion B to achieve higher effciency C to save copper D to reduce harmonics
critically criticize the application of ring main unit in power system
